RDA Brakes · Part number RDB5000 · NZ$94.00 incl. GST
RDA GP Max General Purpose Low Metallic Brake Pad Set by RDA Brakes, part number RDB5000.
NZ$94.00 including GST. Part number RDB5000.
Swapping Out Your BYD SEAL EV Brake Pads — The RDA Way
> Brake pads are your car's best mate when it comes to stopping. They clamp down on the rotors, and that friction slows you down. But they wear out over time thanks to heat and general wear and tear. When they get too thin, it's time for a change to keep you safe on the road.
Uh Oh, Sounds Like You've Got Brake Pad Trouble:
• Brakes sound like a flock of seagulls (squealing or grinding).
• Your BYD SEAL EV isn't stopping like it used to.
• Takes longer to pull up at the lights.
• The brake pedal is vibrating like crazy.
• You can see the pads are looking pretty sad.
Will it pass WOF?
Worn brake pads are a definite no-no for your WOF. They need to be thick enough to do the job properly. Give them a regular check to make sure they're up to scratch.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 2-3 hours
Tools Required: Jack, jack stands, wrench set, socket set, brake cleaner, brake pad spreader, torque wrench
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, grab these must-haves to make the job smoother and safer:
• Brake Cleaner: Blast away all that nasty brake dust. Keeps everything clean and helps the new pads bed in properly. Brake Cleaner
• Anti-Seize Caliper Grease: A little dab on the caliper bolts keeps them from seizing up next time. Makes life easier, trust me. Available at Bob's Shop.
• Safety Glasses: Nobody wants brake dust in their eyes. Protect your peepers! Safety Glasses
• Nitrile Gloves: Keep your hands clean and protected from all the grime. Nitrile Gloves
Expert Recommendation
Keeping your brake pads in good nick is a no-brainer for safety. Let them wear down too much, and you could end up damaging the rotors. Pop into Bob's Shop, and we'll sort you out with the right pads for your BYD SEAL EV.
Fitment Notes
Double-check that these pads fit your exact BYD SEAL EV model and year. Remember to always replace brake pads in pairs (both front or both rear) to keep your braking balanced.
Swing by Bob's Shop, and let's get those brakes sorted!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these brake pads, don't skimp on proper workshop preparation and safety products. Doing the job right the first time protects your investment, saves massive workshop labor fees, and guarantees a quiet, smooth ride!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.