CARFIX

RDA GP Max General Purpose Low Metallic Brake Pad Set RDB2774

RDA Brakes · Part number RDB2774 · NZ$94.00 incl. GST

Need new brake pads for your Chery Tiggo 7? Spot on! These pads are your first line of defence for safe stops.

Price

NZ$94.00 including GST. Part number RDB2774.

Fits these vehicles

Description

Chery Tiggo 7 Brake Pad Replacement: A Kiwi DIY Guide
> Brake pads are what bring your Chery Tiggo 7 to a halt, turning all that forward motion into heat through friction. Over time, especially with all the start-stop driving around town, they wear down. If you leave it too long, you'll end up with dodgy braking and a potential hazard.

Is it Time for New Pads? Check for These Signs:
• Squealing like a pig, grinding, or a constant chirping when you hit the brakes.
• Taking longer to stop, or the brake pedal feels soft and spongy.
• The steering wheel or brake pedal vibrates when you brake.
• Pads look thin (less than 3mm of material left).
• Brake warning light's lit up on the dash (if your Tiggo 7 has wear sensors).

WOF Worthy?
Nope. Dodgy brakes are a recipe for WOF failure. You need decent brake pads with enough friction material to keep you safe on the road.

DIY or Get a Pro?
Difficulty: 6/10 (A good weekend project)
Time Needed: 1-2 hours per axle
Tools You'll Need: Jack and stands, wheel wrench, C-clamp (or piston compressor), brake cleaner, torque wrench, socket set, wire brush, and maybe some caliper pin grease.

🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get cracking on those brake pads, let's make sure you're sorted with a few must-haves. Safety first, eh?
• Safety Glasses: Don't want any brake dust or cleaner in your eyes. Grab a pair of safety glasses.
• Nitrile Gloves: Keep your hands clean and protected from brake fluid and grime with some heavy-duty Nitrile Gloves.
• Brake Cleaner: Blast away all that nasty brake dust and grime. Brake Cleaner is your best mate here.
• Caliper Grease: A little dab of brake caliper grease on the guide pins keeps everything sliding smoothly and prevents annoying squeaks.

Expert Recommendation
Bob @ CARFIX reckons you should always swap out brake pads the moment they show wear. Keep your stopping power top-notch and stay safe on the road. RDA pads are a great choice for your Tiggo 7, offering good performance and lasting well. But hey, everyone's different, right? We'll find the perfect pads for your driving style and budget. Bob @ CARFIX is always here to help you work out exactly what part you need for your Chery Tiggo 7. Make sure you head over to Bob's Shop for a yarn!

Important Fitment Notes
These pads are made for the Chery Tiggo 7 PHEV (2024 onwards) and Tiggo 7 Pro TGDi (2023 onwards). Double-check they're the right fit for your specific model and year, as brake bits can vary even within the same model range.

Bob's signing off – keep those brakes sharp and the rubber side down!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these brake pads, don't skimp on proper workshop preparation and safety products. Doing the job right the first time protects your investment, saves massive workshop labor fees, and guarantees a quiet, smooth ride!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.