RDA Brakes · Part number RDB2733 · NZ$94.00 incl. GST
Need new brake pads for your BYD EV like the Dolphin, Atto 3, or Seal? These are what stops you safely!
NZ$94.00 including GST. Part number RDB2733.
Swapping Out Your Brake Pads — With RDA
> Brake pads are crucial for your BYD EV (Dolphin, Atto 3, Seal). They turn your car's movement into heat via friction, slowing you down. Even with fancy regenerative braking in EVs, these pads still wear out, especially with all that start-stop driving around town.
What Clued You In?
• Brakes sound like a rusty gate opening?
• Taking longer to stop, or the pedal feels soft?
• Feeling a wobble when you hit the brakes?
• Pads look thinner than a cafe lunch?
• That pesky brake warning light's on?
WOF Worries?
Dodgy brake pads are a quick way to fail a WOF here in NZ. Your pads need enough meat on them to stop safely. Check the official Land Transport NZ guidelines for the specifics.
DIY or Get a Pro?
Difficulty: 6/10
Time Needed: 2-3 hours
Gear You'll Need: Jack, stands, spanners, sockets, brake cleaner, brake grease, and a tool to squeeze those brake pistons back in.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking on those brakes, mate, safety first! Never, ever get under a car that's only held up by a jack. Use proper stands – your life's worth it. Grab some Nitrile Gloves to keep the hands clean, and safety glasses to protect your eyes from brake dust. Speaking of brake dust, it's nasty stuff, so give everything a good blast with Brake Cleaner before you start pulling things apart. When reassembling, a dab of anti-seize caliper grease will keep things moving smoothly and quietly.
Expert Advice
New brake pads mean your BYD EV stops like it should, keeping you safe. RDA pads are a solid choice. CARFIX has plenty of options for all driving styles and wallets. Swing by Bob's Shop for a yarn – he'll sort you out with the right parts for your BYD!
Fitment Notes
Double-check you've got the right pad shape and size for your exact BYD model and year. Brake setups can vary even within the same model range, depending on when it was made.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these brake pads, don't skimp on proper workshop preparation and safety products. Doing the job right the first time protects your investment, saves massive workshop labor fees, and guarantees a quiet, smooth ride!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.