
RDA Brakes · Part number RDB265 · NZ$87.00 incl. GST
Need new brake pads for your classic Toyota Celica or trusty Liteace van? These RDA pads will sort you out, giving you the stopping power you need.
NZ$87.00 including GST. Part number RDB265.
Brake Pad Replacement: Get Your Classic Toyota Stopping Like New — Featuring RDA
> Brake pads are what stop your Toyota Celica or Liteace, pressing against the rotors to slow you down. They wear out over time, especially in tough conditions, and you'll need to replace them to keep your braking sharp. This guide walks you through it. Remember, good brakes are a no-brainer for safety!
Symptoms That Led You Here
• Squealing or grinding when you hit the brakes
• Brakes not as responsive as they used to be
• Taking longer to stop than you'd like
• Brake pedal feels soft or gives way easily
• You can see the pads are worn down or damaged
Will it pass WOF?
Dodgy brakes are a surefire way to fail a WOF here in New Zealand. Your pads need enough thickness to pull you up safely. Give them a regular check to make sure they're up to scratch.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 2-3 hours
Tools Required: Jack, jack stands, wrench set, socket set, brake cleaner, brake pad spreader, torque wrench
🛠️ Bob's "Get It Done Right" Companion Checklist
• Safety First: Never get under a car supported only by a jack! Always use proper jack stands. And wear safety glasses – you don't want brake dust in your eyes.
• Cleanliness Counts: Brake dust is nasty stuff. Use Brake Cleaner to blast it off the rotors and calipers before you start. It'll make the job cleaner and safer.
• Hand Protection: Protect your hands with Nitrile Gloves. They'll keep the brake dust and grease off your skin.
• Anti-Seize is Your Friend: Use a dab of anti-seize caliper grease on the brake pad contact points to prevent squealing and ensure smooth movement.
Expert Recommendation
Swapping out your brake pads is key to keeping your Toyota Celica or Liteace safe on the road. These RDA brake pads [SKU RDB265] are a solid choice, but CARFIX has a range of options to match your budget and how you drive. Bob @ CARFIX is always here to give you a hand finding exactly what you need for your classic Toyota. Pop into Bob's Shop for a yarn!
Fitment Notes
Double-check these brake pads fit your exact model year and brake setup. Some Celica and Liteace models had different brake bits. Always check the manufacturer's specs before you get started.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> DF1928S)](/parts/DF1928S) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.