
RDA Brakes · Part number RDB2444 · NZ$95.00 incl. GST
Need new brake pads for your MG ZS? These RDA ones will pull you up no worries! We reckon they're a top choice for slowing down those compact SUVs, and we keep 'em right here.
NZ$95.00 including GST. Part number RDB2444.
MG ZS Brake Pad Replacement Guide — Featuring RDA
> Brake pads are the unsung heroes tucked away in your MG ZS, working hard to keep you safe. They're basically tough friction blocks that squeeze against the brake rotors when you hit the pedal, turning all that 'going' energy into heat to bring you to a stop. Because they do so much work, they wear down over time. Letting them get too thin is asking for trouble – and could even damage other parts.
Symptoms That Led You Here
• Hear a squeal or grind when you brake?
• Taking longer to stop than usual?
• Feel a wobble through the pedal or steering wheel?
• Brake pedal feels soft or spongy?
• Dashboard warning light's on (if your ZS has the sensors)?
Will it pass WOF?
Nah, mate. Worn-out brake pads are a dead cert for a WOF failure here in NZ. They check the pad thickness and how well your brakes are actually working. If they're too thin or not up to scratch, you'll be getting a big fat 'FAIL'.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: Allow 1-2 hours per axle
Tools You'll Need: Jack, axle stands (never skip these!), wheel wrench, G-clamp or caliper tool, spanner set, torque wrench, brake cleaner, wire brush, maybe a brake bleeder kit.
🛠️ Bob's "Get It Done Right" Companion Checklist
• Safety First, Always: Never, ever get under your MG ZS supported only by a jack. Use proper axle stands. Safety glasses are a no-brainer to keep brake dust out of your eyes.
• Keep it Clean: Brake dust is nasty stuff. Use plenty of Brake Cleaner to blast it away from the caliper and rotor. A wire brush helps shift stubborn bits.
• Protection is Key: Wear heavy-duty Nitrile Gloves to keep your hands clean and protected from brake fluid and grime.
• Lube it Right: Use a dab of anti-seize caliper grease on the caliper slide pins to keep everything moving smoothly.
Expert Recommendation
Bob here at CARFIX reckons you should get those brake pads sorted as soon as you notice any wear. Leaving it too long could mean forking out for new rotors or calipers. These RDA pads are a good honest choice for your MG ZS, giving you good stopping power without breaking the bank. Don't skimp on safety – get your brakes checked ASAP for peace of mind on our Kiwi roads.
Bob @ CARFIX is always on hand to help you work out exactly what part you need for your MG ZS. Make sure you head over to Bob's Shop for a chat!
Fitment Notes
These pads are made to fit various MG ZS models, including the T-GDi, VTi, T, and EV from 2017 onwards, plus the older MG ZS 120 (2001-2005). Always double-check the year and model of your car to be sure they're the right fit.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> Check out our compatible disc brake rotors (part DF3021S) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.