CARFIX

RDA GP Max General Purpose Low Metallic Brake Pad Set RDB1244

RDA Brakes · Part number RDB1244 · NZ$87.00 incl. GST

Need new brake pads for your classic Toyota Cressida or Mark II (1988-1993)? These RDA pads are a ripper choice to keep your braking sharp and safe, just like the originals.

Price

NZ$87.00 including GST. Part number RDB1244.

Fits these vehicles

Description

Brake Pad Sorted — With RDA
> Brake pads are like the jandals of your braking system – they wear out over time! They create friction against the brake rotors to slow you down. On older, heavier sedans like your Toyota Cressida or Mark II, good brakes are non-negotiable for safe cruising. Don't get caught short in tough conditions.

Spotting the Warning Signs
• Hear a squeal or a nasty grinding when you hit the brakes?
• Taking longer than usual to pull up?
• Brake pedal feels a bit soft or spongy?
• Steering wheel or pedal shakes when braking?
• Pads looking thin (less than 3mm of material left)?

Will it pass WOF?
No way, mate. Worn brake pads are a WOF failure. You need decent pad thickness and good stopping power to pass the test.

DIY or Workshop?
Difficulty: 6/10
Estimated Time: 1-2 hours per axle
Tools Required: Jack, jack stands, lug wrench, C-clamp or brake caliper piston tool, wrench set (for caliper bolts), brake cleaner, torque wrench, safety glasses, gloves.

🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking, safety first! Never get under a car supported only by a jack – always use proper jack stands. Give those brake rotors a good blast with Brake Cleaner to get rid of all that carbon dust – it's nasty stuff. Grab some Nitrile Gloves to keep your hands clean, and a wee bit of anti-seize caliper grease to stop things seizing up later on. Safety glasses are a no-brainer, too.

Expert Recommendation
Here at CARFIX, we reckon it's a no-brainer to replace brake pads the moment they start showing wear. These RDA pads are a top choice for your Toyota Cressida or Mark II, giving you reliable stopping power without breaking the bank. Don't skimp on safety – dodgy brakes are just not worth it. Bob @ CARFIX is always here to sort you out with the right part for your Toyota Cressida or Mark II. Pop into Bob's Shop for a yarn!

Fitment Notes
These brake pads are made specifically for the 1988-1993 Toyota Cressida and Mark II. Double-check your car's year and model to be sure they fit, as brake bits can change even within the same model range.

---

🛠️ Bob's Pro Tip: Do the Job Right!
> Check out our compatible disc brake rotors (part DF7085S) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.