RDA Brakes · Part number RDB1189 · NZ$82.00 incl. GST
Need new brake pads for your classic ROVER 800? These RDA ones will pull you up safely.
NZ$82.00 including GST. Part number RDB1189.
ROVER 800 Brake Pad Swap: A Kiwi DIY Guide — Brought to you by RDA
> Your ROVER 800's brake pads are what slow you down, turning all that forward motion into heat when they clamp on the rotors. They wear out over time, and that means less stopping power. For your classic executive sedan, keeping those brakes top-notch is a no-brainer for safety.
Uh Oh... Reckon Your Brake Pads Are Kaput?
• Hear a squeal or grind when you hit the brakes?
• Taking way longer to stop than usual?
• Steering wheel or brake pedal doing the haka when braking?
• Brake pedal feels like a sponge?
• Pads look thinner than a Kiwi saver biscuit (less than 3mm)?
WOF Woes?
Worn brake pads? Yeah, nah, that's a WOF failure, mate. No if's, and's, or but's. You need decent pad thickness to pass inspection and keep your ROVER safe.
DIY or Hand it to a Pro?
Difficulty: 6/10 (A good weekend project)
Estimated Time: 1-2 hours per wheel
What You'll Need: Jack, stands, wheel brace, G-clamp or piston compressor, socket set, spanners, brake cleaner, torque wrench.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, safety first, yeah? Grab some safety glasses to keep the brake dust out of your peepers, and a pair of nitrile gloves to keep your hands clean. Brake dust is nasty stuff.
While you're at it, give your rotors a good blast with some brake cleaner to get rid of all the old muck and carbon buildup. And a wee smear of anti-seize caliper grease on the right spots will keep things moving smoothly.
Expert Recommendation
Bob at CARFIX reckons you should swap out your brake pads the moment they start showing signs of wear. Don't muck around with your safety! These RDA RDB1189 pads are a top choice for your ROVER 800, giving you good performance and lasting well. Don't risk it with dodgy brakes. Pop into Bob's Shop for a yarn and we'll get you sorted for your ROVER 800.
Fitment Notes
These pads are made to fit the ROVER 800 825 SI/Sterling Catalytic-Conv (1986-1991), ROVER 800 827 SI/Sterling (1988-1991), and ROVER 800 827 Vitesse/SLI (1988-1991) models. Double-check they're the right ones for your exact model and year, as there can be differences even in the same series. Bob's the man to ask!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> DF1811S)](/parts/DF1811S) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.