RDA Brakes · Part number RDA8648 · NZ$349.00 incl. GST
For Chevrolet Silverado and GMC Sierra 3500 HD trucks, disc brake rotors are your first line of defence for safe stopping. They're what your brake pads clamp onto.
NZ$349.00 including GST. Part number RDA8648.
Swapping Out Your Disc Brake Rotors — With RDA
> Disc brake rotors are absolutely critical for bringing your Chevrolet Silverado or GMC Sierra 3500 HD to a halt. They take a hammering from friction and heat, especially when you're hauling heavy loads or doing lots of stop-start driving. Ignoring worn rotors is just asking for trouble, mate.
Spotting the Warning Signs
• Braking sounds like a bag of spanners?
• Steering wheel doing the Macarena when you brake?
• Taking forever and a day to stop?
• Rotors looking like they've been attacked by a grinder?
WOF Woes?
Worn-out disc brake rotors are a dead cert for failing your WOF here in New Zealand. Make sure they're thick enough and not cracked to bits, or you'll be walking home. That's a no-brainer, eh?
DIY or Get a Pro?
Difficulty: 6/10
Time Needed: 2-3 hours per axle
Gear You'll Need: Jack and stands (never skip on safety!), lug wrench, socket set, torque wrench, brake cleaner, rotor puller (might save you some grief)
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking, grab these essentials to make the job safer and cleaner:
• Safety First: Chuck on some Safety Glasses to keep the rust and brake dust out of your peepers. And don't even think about getting under your truck without proper jack stands!
• Cleanliness is Key: Brake dust is nasty stuff. A can of Brake Cleaner will blast it away, keeping everything clean and your lungs happy.
• Glove Up: Protect your hands with some Nitrile Gloves. Brake cleaner dries out the skin.
• Lube It Right: Use a dab of anti-seize Caliper Grease on the caliper bolts to stop them seizing up next time. A little goes a long way.
Bob's Two Cents
I reckon you should always replace disc brake rotors in pairs, keeps everything balanced and sweet. Regular checks and swapping out those worn rotors are crucial for keeping your Chevrolet Silverado or GMC Sierra 3500 HD safe as houses. Now, pop into Bob's Shop, and we'll sort you out!
Nitty-Gritty Fitment Notes
Double-check those new rotors are spot-on for your Chevrolet Silverado or GMC Sierra 3500 HD's year and model. Some have different sized rotors. When in doubt, check your service manual or ask a pro.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these disc brake rotor, don't skimp on proper workshop preparation and safety products. Doing the job right the first time protects your investment, saves massive workshop labor fees, and guarantees a quiet, smooth ride!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.