RDA Brakes Standard Disc Brake Rotor Vented 275mm

RDA Brakes · Part number RDA8590 · NZ$136.00 incl. GST

RDA Brakes Standard Disc Brake Rotor Vented 275mm by RDA Brakes, part number RDA8590.

Price

NZ$136.00 including GST. Part number RDA8590.

Fits these vehicles

• Toyota Belta (2005–2013)
• Toyota Belta (2005–2013)
• Toyota Belta (2005–2014)
• Toyota Corolla (2006–2012)
• Toyota Corolla (2006–2012)
• Toyota Corolla (2006–2012)
• Toyota Corolla (2007–2012)
• Toyota Corolla (2012–2020)
• Toyota Corolla (2012+)
• Toyota Corolla (2012+)
• Toyota Corolla (2013+)
• Toyota Ist (2007–2010)
• Toyota Ractis (2005–2010)
• Toyota Ractis (2005–2010)
• Toyota Ractis (2005–2010)
• Toyota Vitz (2005–2008)
• Toyota Vitz (2005–2010)
• Toyota Vitz (2005–2011)
• Toyota Vitz (2007–2011)
• Toyota Vitz (2010–2020)
• Toyota Vitz (2010–2020)
• Toyota Vitz (2012–2020)

Description

Swapping Out Your Disc Brake Rotors — the RDA Way
> Your Toyota Corolla or Yaris relies on disc brake rotors to pull you up safely. They cop a hammering, though, and can wear down, warp in the heat, or get rusty. That means dodgy braking, especially if you're always on the stop-start in town.
What Clued You In?
• Brakes squealing or grinding like crazy?
• Brake pedal vibrating?
• Taking ages to stop?
• Rotors looking scored, rusty, or just plain buggered?
• Brake pads wearing unevenly, eh?
WOF Woes?
Dodgy brake rotors are a dead cert for a WOF failure here in NZ. They've gotta be above the minimum thickness and not too far gone to pass the test.
DIY or Pay a Pro?
Difficulty: 6/10
Time needed: An hour or two per rotor
Gear you'll need: Jack and stands, wheel brace, socket set, torque wrench, brake cleaner, rotor puller (maybe).
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get cracking on those rotors, let's make sure you're sorted. Safety first, always!
• Safety Glasses: Carbon brake dust is a pain in the eye. Safety Glasses will protect your precious eyes.
• Nitrile Gloves: Keep your mitts clean and away from brake dust with some proper Nitrile Gloves. You can thank me later.
• Brake Cleaner: Blast away all that nasty carbon dust and grime before you start pulling things apart. Makes the job cleaner and easier. Grab a can of Brake Cleaner.
• Caliper Grease: A little dab of anti-seize caliper grease on the caliper pins will keep things moving smoothly and prevent sticking.

And remember, never, ever get under a car that's only held up by a jack! Use proper stands. Now, onto the rotors!
Expert Advice
Dodgy brake rotors mean your Toyota Corolla or Yaris won't stop like it should. Get them sorted to keep you safe and stop other brake bits from wearing out too fast. Bob @ CARFIX is ready to help you find the perfect rotor for your Toyota. Pop into Bob's Shop for a yarn!
Fitment Tips
Make sure the new rotor is the same as the old one for your Toyota Corolla or Yaris. Check everything lines up before you bolt it all together.

---

🛠️ Bob's Pro Tip: Do the Job Right!
> GDB3425)](/parts/GDB3425) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.