CARFIX

RDA Brakes Standard Disc Brake Rotor Vented 296mm RDA8390

RDA Brakes · Part number RDA8390 · NZ$218.00 incl. GST

They're dead important for a good WOF check.

Price

NZ$218.00 including GST. Part number RDA8390.

Fits these vehicles

Description

Swapping Out Your Disc Brake Rotors — With RDA
> Brake rotors are the unsung heroes of stopping power, turning all that forward motion into heat when you hit the brakes. But, like anything, they wear out over time, especially with all the stop-start driving around town in your Nissan Altima or Teana. Ignoring worn rotors means your stopping distance goes south real quick.

Spotting the Warning Signs
• Feeling a wobble or pulse in the brake pedal or steering wheel when you brake.
• Hearing squeals, scrapes, or a nasty grinding noise when you're slowing down.
• Noticing it takes longer to stop, or the brake pedal feels soft.
• Seeing deep scratches, grooves, or a blue-ish tinge on the rotor surface.

Will it pass WOF?
Nah, mate. If your brake rotors are looking sad – too thin, warped, or proper rooted – your car will fail its WOF faster than you can say 'flat tyre'. Brakes need to be spot-on for safety.

DIY or Workshop?
Skill Level: 6/10 (A good Saturday project)
Time Needed: An hour or two per axle
Gear You'll Need: Jack and stands, wheel nut wrench, brake piston tool, socket set, torque wrench, brake cleaner, wire brush, and maybe an impact driver if things are stuck tight.

🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking on those rotors, here's Bob's quick rundown to keep you safe and your ride sweet as:
• Safety First, Mates! Never, ever crawl under a car that's only held up by a jack. Get yourself some proper jack stands – your life's worth it! And don't forget the safety glasses and nitrile gloves to keep the muck off.
• Cleanliness is Key: Give those new rotors a good blast with brake cleaner to get rid of any factory gunk. Trust me, you don't want that stuff messing with your brake pads.
• Lube is Your Friend: A wee dab of copper anti-seize on the caliper bolts will make life easier next time you're in there. Just don't get any on the brake pads or rotors!
• Dust Be Gone: Brake dust is a bugger, right? A good spray of brake cleaner will sort that out, keeping everything clean and your brakes working their best.

Expert Recommendation
Bob @ CARFIX reckons if your brake rotors are showing their age, get them swapped out pronto for safety's sake. The RDA RDA8390 is a stellar choice for your Nissan Altima or Teana. They're built tough and won't let you down. Pop into Bob's Shop, and we'll sort you out with the right parts for your Nissan.

Fitment Notes
This rotor is a perfect match for the NISSAN ALTIMA (2013-2999) and NISSAN TEANA (2008-2013). But double-check your car's year, model, and engine size to be 100% sure, as brake setups can be a bit different.

Bob's always here to lend a hand. Give us a yell!

---

🛠️ Bob's Pro Tip: Do the Job Right!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.