RDA Brakes Standard Disc Brake Rotor Solid 278mm

RDA Brakes · Part number RDA8385 · NZ$142.00 incl. GST

Got a Mazda 6 or Atenza needing new brake rotors?

Price

NZ$142.00 including GST. Part number RDA8385.

Fits these vehicles

• Mazda 6 (2012–2018)
• Mazda 6 (2012–2020)
• Mazda 6 (2012+)
• Mazda 6 (2012+)
• Mazda 6 (2012+)
• Mazda 6 (2012+)
• Mazda 6 (2012+)
• Mazda 6 (2012+)
• Mazda 6 (2012+)
• Mazda 6 (2013+)
• Mazda 6 (2013+)
• Mazda 6 (2014+)
• Mazda 6 (2014+)
• Mazda 6 (2014+)
• Mazda 6 (2014+)
• Mazda 6 (2018+)
• Mazda 6 (2018+)
• Mazda 6 (2018+)
• Mazda 6 (2018+)
• Mazda 6 (2018+)
• Mazda 6 (2018+)
• Mazda 6 (2018+)
• Mazda 6 (2018+)
• Mazda 6 (2018+)

Description

Swapping Out Your Disc Brake Rotors — With RDA
> Buggered brake rotors are a safety no-brainer. Over time, especially with all that stop-start driving around our towns, they get worn, warped, and grooved. That means your braking just isn't up to scratch, mate.
What Clued You In?
• Brake pedal or steering wheel juddering when you hit the brakes.
• Horrible squealing or grinding noises.
• Taking ages to pull up.
• Rotors looking scored, grooved, or all discoloured.
• Brake pedal feeling soft or spongy.
WOF Timebomb?
Worn out rotors are a surefire WOF failure. They reckon anything that messes with your braking efficiency is a big no-no.
DIY or Get a Pro?
Skill Level: 6/10 (A Bit Tricky)
Time Needed: An hour or two per axle
Gear You'll Need: Jack and stands, wheel nut wrench, brake caliper tool, socket set, torque wrench, brake cleaner, wire brush, maybe an impact wrench if things are tight.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, mate, safety first! Grab yourself some safety glasses to keep the crud out of your eyes when you're scrubbing down the calipers. Those brake pads shed carbon dust like nobody's business, so have some Brake Cleaner handy to blast it all away. It's nasty stuff, and keeps it off your hands too. Speaking of hands, a decent set of Nitrile Gloves will save you from hours of scrubbing grease and grime, trust me. And lastly, a smear of anti-seize caliper grease on the right spots will make the job easier next time.
Expert Recommendation
Here at CARFIX, we know good brakes are crucial for keeping your precious cargo safe. Dodgy rotors don't just make stopping harder; they'll chew through your new brake pads faster than you can say 'cafe lunch'. Replacing rotors when they're past it is a smart move. These RDA RDA8385 rotors are a great choice for your Mazda 6 or Atenza. If you're not sure what you need, pop into Bob's Shop for a yarn!
Fitment Notes
This rotor (RDA8385) fits heaps of Mazda 6 and Atenza models from 2012 onwards, petrol or diesel. Double-check your exact model and year though, as things can change even within the same range.
Bob's always here to point you towards the right parts!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> DB417RTQ)](/parts/DB417RTQ) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.