RDA Brakes Standard Disc Brake Rotor Vented 336mm

RDA Brakes · Part number RDA786 · NZ$209.00 incl. GST

Gotta stop that mighty Land Cruiser, eh? Disc brake rotors are key! They turn your 4WD's forward push into controlled stopping power.

Price

NZ$209.00 including GST. Part number RDA786.

Fits these vehicles

• Toyota
• Toyota Land Cruiser (1990–1992)
• Toyota Land Cruiser (1990–1997)
• Toyota Land Cruiser (1990–1997)
• Toyota Land Cruiser (1990–1997)
• Toyota Land Cruiser (1990–1999)
• Toyota Land Cruiser (1990+)
• Toyota Land Cruiser (1992–1997)
• Toyota Land Cruiser (1992–1997)
• Toyota Land Cruiser (1995–1997)
• Toyota Land Cruiser (1999–2004)
• Toyota Land Cruiser 90 (1995–2000)
• Toyota Land Cruiser 90 (1996–2002)
• Toyota Land Cruiser 90 (1996–2002)
• Toyota Land Cruiser 90 (2000–2003)

Description

Land Cruiser Disc Brake Rotor Swap — With RDA
> Those brake rotors on your Land Cruiser are built tough, but even they give up the ghost after plenty of hard yards. Towing, off-roading... it all adds up. When they're past their prime, your braking suffers, and that's not a risk worth taking.

Signs It's Time for New Rotors
• Brakes sound like a startled seagull (squealing or grinding).
• The brake pedal's doing the Macarena (vibrating).
• Taking longer than usual to pull up.
• Rotors look like they've been attacked by a grinder (scoring, cracks, rust).
• Your brake pads are wearing unevenly – suss!

Will it pass WOF?
Buggered brake rotors are a surefire way to fail a WOF here in NZ. They need to be above the minimum thickness and free from cracks to get the green light.

DIY or Workshop?
Difficulty: 6/10
Estimated Time: 2-3 hours per axle
Tools Required: Jack and stands, wheel wrench, socket set, torque wrench, brake cleaner, replacement brake pads (recommended).

🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get cracking on those rotors, a few quick words from yours truly. Safety first, always! Never, ever get under your Land Cruiser supported only by a jack. Use proper axle stands – no exceptions! Grab some Nitrile Gloves to keep your hands clean and a can of Brake Cleaner to blast away that brake dust – it's nasty stuff. Also, a little smear of anti-seize caliper grease on the right spots will keep things moving smoothly next time you're in there. Safety glasses are a no-brainer too - protect those peepers!

Expert Recommendation
Worn brake rotors put a real dent in your Land Cruiser's stopping power, especially when you're tackling tough terrain or hauling a load. New rotors mean better braking and less chance of damaging other bits and pieces. I'm always here to help you figure out exactly what part you need for your Land Cruiser. Don't be a stranger, pop into Bob's Shop for a yarn!

Fitment Notes
Double-check that these rotors fit your specific Land Cruiser model and year. Rotor sizes and brake pad types can vary. Always replace rotors in pairs (both front or both rear) to keep things balanced.

---

🛠️ Bob's Pro Tip: Do the Job Right!
> GDB7049YO)](/parts/GDB7049YO) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.