RDA Brakes Standard Disc Brake Rotor Vented 255mm
RDA Brakes · Part number RDA778 · NZ$171.00 incl. GST
Need new disc brake rotors for your trusty Toyota Liteace or Town Ace? These are crucial for good stopping power, especially when you're loaded up or cruising around town. RDA rotors are a top pick, and we stock 'em.
Price
NZ$171.00 including GST. Part number RDA778.
Fits these vehicles
- Toyota Liteace (1992–1995)
- Toyota Liteace (1996–2002)
- Toyota Liteace (1997–1999)
- Toyota Town Ace (1992–2001)
- Toyota Town Ace (1996–2001)
- Toyota Town Ace (1998–2007)
Description
Toyota Liteace & Town Ace Disc Brake Rotor Replacement Guide — Featuring RDA
> Your disc brake rotors are what your brake pads squeeze to slow you down. Think of them as the unsung heroes of stopping! Over time, especially if you're always on the brakes or hauling heavy loads (like most Liteace and Town Ace owners!), they wear down. They get thin, warped, or grooved, and that means your braking isn't as sharp as it should be.
Is it Time for New Rotors? Watch Out For:
• That juddering feeling in the brake pedal or steering wheel when you hit the brakes?
• Squealing or grinding noises.
• Taking longer to stop than you used to?
• Rotors looking scored, grooved, or even a bit blue from heat?
• A brake pedal that feels soft or spongy?
WOF Worries?
Yep, you'll fail a WOF faster than you can say 'cafe lunch' with dodgy rotors. They check rotor thickness and condition closely. Don't risk it – get them sorted!
DIY or Get a Pro?
Difficulty: 6/10 (A good weekend project if you're handy)
Estimated Time: 1-2 hours per axle (if you know your way around a socket set)
Tools You'll Need: Jack, jack stands (never skip these!), wheel nut wrench, brake caliper compression tool, socket set, torque wrench, wire brush, brake cleaner, safety glasses, gloves.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you even think about cracking open the toolbox, safety first, aye? We don't want any 'she'll be right' moments turning into a trip to the A&E. Always use axle stands when you're under the van – never trust a jack alone, mate! Grab yourself some Nitrile Gloves to keep the hands clean, and some Safety Glasses to protect your eyes from brake dust – that stuff's nasty. And while you're at it, a can of Brake Cleaner will make quick work of blasting away all the old brake dust and grime. A little squirt of anti-seize on the caliper bolts never hurts either.
Bob's Two Cents
I reckon you should always replace rotors that are looking tired. For your Liteace or Town Ace, the RDA RDA778 rotor is a solid choice, built tough for the job. Pop into Bob's Shop, and we'll get you sorted with the right parts!
Important Fitment Notes
This RDA rotor (RDA778) fits a bunch of Toyota Liteace and Town Ace models from '92 to '07. Double-check your van's year and model to be sure it's the right fit. These vans had a few different setups over the years, so it pays to be certain.
Bob's out! Head over to Bob's Shop for a yarn.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> GDB388)](/parts/GDB388) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.