RDA Brakes · Part number RDA771 · NZ$289.00 incl. GST
Need new disc brake rotors for your Toyota Coaster D or TD? These RDA rotors give you the friction you need to stop safely.
NZ$289.00 including GST. Part number RDA771.
Toyota Coaster Disc Brake Rotor Replacement — With RDA
> G'day! Your Toyota Coaster's disc brake rotors are dead important for good stopping power. Over time, especially with the heavy use these vans often see, they wear down. That means less braking, and that's never a good idea. Time for a swap, eh?
Spotting the Trouble Signs:
• Brakes screeches or grinds like a rusty gate.
• Steering wheel shimmies when you brake.
• Takes way too long to pull up at the lights.
• Rotors look like they've been through a war zone.
• Brake pads wearing unevenly – dodgy!
WOF Worries?
Dodgy rotors are a surefire way to fail your WOF here in NZ. Make sure they're thick enough and not too beat up, or you'll be back for a re-check.
DIY or Get a Pro?
Difficulty: 6/10 – A bit of a mission, but doable.
Time Needed: 2-3 hours per axle – set aside a good chunk of your Saturday.
Gear You'll Need: Jack, stands (never skip these!), lug wrench, socket set, torque wrench, brake cleaner – and maybe a caliper tool if things are seized solid.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get stuck in, mate, safety first! Never, ever get under the Coaster supported only by a jack – use proper axle stands. Grab some Nitrile Gloves to keep the hands clean and a pair of safety glasses to keep the brake dust out of your eyes. Give those new rotors a good blast with Brake Cleaner to get rid of any manufacturing gunk. And don't forget a dab of anti-seize grease on the caliper bolts to keep things sweet for next time.
Expert Advice
Swapping out your Coaster's rotors is a no-brainer for keeping your braking top-notch. Give Bob @ CARFIX a yell and he'll sort you out with the right bits for your Coaster. Head over to Bob's Shop for a yarn!
Fitment Notes
Double-check those new rotors fit your exact Coaster model and year. Rotor sizes and mounting can vary, especially between the D and TD models from '93 to '04.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, always install fresh brake pads. Check out our compatible RDA Brake Pads (Part No. RDB394) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.