RDA Brakes · Part number RDA7708 · NZ$166.00 incl. GST
For your trusty KIA CERATO, disc brake rotors are the unsung heroes of your stopping power, giving your brake pads a solid surface to grab onto, ensuring you pull up safely every single time.
NZ$166.00 including GST. Part number RDA7708.
Disc Brake Rotor Replacement — Let's Get Your KIA CERATO Stopping Like New!
> Right, let's talk about those disc brake rotors — they're absolutely critical for keeping you safe on the road, providing the essential surface for your brake pads to do their magic. Over time, all that heat and friction means they wear down, can warp, or get scored up. And for a daily runner like your KIA CERATO, that can really put a dent in your braking performance.
How Do You Know It's Time for a Change?
• Feeling a bit of a wobble or pulsing through the brake pedal or steering wheel when you hit the brakes?
• Hearing any squealing, grinding, or scraping noises that sound a bit off when you're slowing down?
• Noticing it's taking a bit longer to come to a complete stop?
• Can you see any deep grooves, discolouration, or rough patches on the rotor surface?
• Does your brake pedal feel a bit soft or spongy when you press it?
WOF Check: Will It Pass?
No chance, mate! Worn, warped, or damaged brake rotors are a big no-no. They'll absolutely cause your vehicle to fail its Warrant of Fitness (WOF) inspection here in New Zealand. Safety first, always!
DIY or Pop into the Workshop?
Difficulty: 6/10 (A bit of a challenge, but totally doable with a good cuppa and some patience!)
Estimated Time: About 1-2 hours per axle — give yourself a good afternoon for it.
Tools Required: Jack, dependable jack stands (never get under a car supported only by a jack!), lug wrench, brake caliper compression tool, socket set, torque wrench (super important for tightening everything just right!), brake cleaner, wire brush, safety glasses, and some sturdy gloves.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, grab these bits and pieces to make the job easier and safer:
• A can of Brake Cleaner: Essential for blasting away all that carbon dust and grime.
• Some anti-seize caliper grease: Helps keep things moving smoothly and prevents seizing.
• Good quality Safety Glasses: Protect your peepers from any flying bits.
• Heavy-duty Nitrile Gloves: Keep your hands clean and protected from all the brake dust and grease.
Bob's Top Tips from the Garage
Bob here at CARFIX always says, don't skimp on your brakes! If you're seeing any signs of wear or damage, get those rotors replaced. It's all about keeping your braking performance tip-top and, most importantly, keeping you safe. This RDA RDA7708 is a ripper choice — great quality, built to last, and will give your KIA CERATO the stopping power it deserves. Swing by Bob's Shop for a yarn — I'm always keen to help you figure out exactly what parts your KIA CERATO needs.
Fitment Notes
Just a heads-up on the fitment: This particular rotor is made for the front axle of KIA CERATO CRDi models from 2005-2009, and the non-CRDi CERATO models from 2004-2007, plus CERATO CRDi from 2005-2008. Always double-check your vehicle's exact year, model, and engine type to make sure you get the perfect match. Don't want to get stuck with the wrong part on a Saturday afternoon, do we?
Need a hand? Pop into Bob's workshop or give us a call. We're always here to help you get sorted!
---
🛠️ Bob's Pro Tip: Do the Job Right!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.