RDA Brakes · Part number RDA7668 · NZ$200.00 incl. GST
Gotta keep those brakes sharp, eh? Disc brake rotors are what stop your Ford Escape or Mazda Tribute, and this RDA one's a solid choice.
NZ$200.00 including GST. Part number RDA7668.
Swapping Out Your Brake Rotors — The RDA Way
> Disc brake rotors are dead important for stopping those heavier SUVs like your Ford Escape or Mazda Tribute. They wear down over time, no doubt, but keeping on top of replacement will make sure you pass that WOF check.
What Clued You In?
• Squealing like a pig when you hit the brakes.
• The steering wheel's doing the Macarena when you try to stop.
• Taking longer to pull up at the lights – that's not ideal, mate.
• Rotors look like they've been through a war – scoring, rust, the works.
• Pads wearing unevenly – one side's gone, the other's sweet.
Will it pass WOF?
Buggered brake rotors are a classic WOF fail here in NZ. They gotta be above that minimum thickness and not looking like they're about to fall apart.
DIY or Workshop?
Skill Level: 6/10 (Tricky, but not impossible)
Time Needed: An hour or two per rotor, give or take.
Gear You'll Need: Jack and stands (never skip on safety!), wheel brace, socket set, torque wrench, brake cleaner, rotor puller (if they're being stubborn).
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking, a bit of prep is a no-brainer. Grab some Brake Cleaner to blast away all that nasty brake dust – you don't want to be breathing that in. A squirt of anti-seize caliper grease on the right spots keeps things smooth. Safety first, too – chuck on some safety glasses and nitrile gloves to keep your eyes and hands clean. Trust me, you'll thank me later. Those dusty metal tracks are tough conditions for your skin.
Expert Recommendation
Worn rotors are a safety risk, plain and simple. Replacing them on your Ford Escape or Mazda Tribute is a no-brainer. Get in touch with Bob at CARFIX – he'll sort you out with the right parts for your Ford Escape or Mazda Tribute. Pop into Bob's Shop for a yarn!
Fitment Notes
Double-check you're getting the right size rotor for your Ford Escape, Mazda Tribute, or Holden Piazza. They muck around with sizes sometimes, so don't just assume!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> GDB1330)](/parts/GDB1330) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.