RDA Brakes Standard Disc Brake Rotor Vented 285mm
RDA Brakes · Part number RDA7645 · NZ$136.00 incl. GST
Gotta keep those brakes sharp, eh? Disc brake rotors are what your brake pads squeeze against to slow you down.
Price
NZ$136.00 including GST. Part number RDA7645.
Fits these vehicles
- Mitsubishi
- Mitsubishi
- Mitsubishi IO (1999–2001)
- Mitsubishi IO (2000–2007)
- Mitsubishi IO (2001–2007)
- Mitsubishi Pajero IO (1999–2000)
- Mitsubishi Pajero IO (2000–2002)
Description
Disc Brake Rotor Replacement Guide — Featuring RDA
> Disc brake rotors are the unsung heroes of your Mitsubishi IO or Pajero Pinin's braking. They're the surface your brake pads clamp onto, turning speed into stopping power. But, dusty metal tracks and tough conditions can take their toll, leading to wear, warping, or even cracks. This is especially true if you're giving your Mitsi a good thrashing, on and off the road.
Symptoms That Led You Here
• Squealing like a banshee when you hit the brakes.
• Feeling a judder or wobble through the brake pedal.
• Taking longer to pull up than you used to.
• Seeing grooves, rust, or other nasties on the rotor itself.
Will it pass WOF?
Dodgy brakes are a surefire way to fail your WOF here in New Zealand. Your rotors need to be above the minimum thickness and free from any major damage to get the thumbs up.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 1-2 hours per rotor
Tools Required: Jack and stands (never get under a car supported ONLY by a jack!), lug wrench, socket set, torque wrench, brake cleaner, and maybe a brake caliper tool.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, grab these essentials to make the job safer and easier:
• Safety First: Always wear safety glasses to protect your peepers from brake dust and debris. And grab some Nitrile Gloves to keep your hands clean — brake dust is a bugger to get off!
• Cleanliness Counts: Brake dust is nasty stuff. Give your rotors a good blast with Brake Cleaner before you start, and again after you're done. This helps your new pads bed in properly.
• Protection is Key: A smear of anti-seize caliper grease on the backs of the brake pads will stop any annoying squeals. It's cheap insurance!
• Don't Forget: To bed the new rotors in. Gentle stops from 80 km/h down to 20 km/h, repeated 4-5 times.
Expert Recommendation
Swapping out your Mitsubishi IO or Pajero Pinin's brake rotors is a no-brainer for keeping your braking performance spot on. While RDA rotors are a decent option, CARFIX stocks a whole range to suit different budgets and driving styles. Swing by Bob's Shop for a yarn and let's sort you out with the perfect rotors for your Mitsi!
Fitment Notes
Double-check these rotors fit your specific Mitsubishi IO or Pajero Pinin. Some models have different sized rotors. Always replace in pairs to keep braking even.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> GDB3270)](/parts/GDB3270) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.