CARFIX

RDA Brakes Standard Disc Brake Rotor Vented 324mm

RDA Brakes — RDA Brakes Standard Disc Brake Rotor Vented 324mm — part number RDA7460

RDA Brakes · Part number RDA7460 · NZ$221.00 incl. GST

RDA Brakes Standard Disc Brake Rotor Vented 324mm by RDA Brakes, part number RDA7460.

Price

NZ$221.00 including GST. Part number RDA7460.

Fits these vehicles

Description

Swapping Out Your Disc Brake Rotors — Featuring RDA
> Disc brake rotors are your van's first line of defence when you hit the brakes. For hard-working vans like the Hyundai H-1, iLOAD, and iMAX, these can wear out faster than you think. Thin rotors, warping, and grooves can all lead to dodgy stopping and a failed WOF. Let's get those brakes back to top-notch condition!

Spotting the Warning Signs
• Feeling a judder through the brake pedal or steering wheel when you brake?
• Hearing squeals, grinding, or scraping when you slow down?
• Noticing it takes longer to stop than it used to?
• Seeing deep scratches, grooves, or heat damage on the rotor?
• Brake pedal feels soft or spongy?

WOF Woes?
A big NO. Worn-out, warped, or damaged brake rotors are a surefire way to fail your Warrant of Fitness (WOF). Good brakes are non-negotiable for safety on our roads.

DIY or Call in the Pros?
This one's a 6/10 on the tricky scale. Budget 1-2 hours per axle. You'll need: Jack, jack stands (never get under a car supported only by a jack!), wheel brace, brake caliper socket/spanner, C-clamp or brake piston tool, torque wrench, wire brush, and brake cleaner. An impact wrench might save you some elbow grease.

🛠️ Bob's "Get It Done Right" Companion Checklist
Before you even think about touching those brakes, safety first! Grab yourself some safety glasses to keep the grit out of your eyes and a pair of heavy-duty nitrile gloves to keep your hands clean. Brake dust is nasty stuff! Give those rotors a good blast with Brake Cleaner to remove any carbon buildup. And don't forget a little [anti-seize caliper grease] to keep things moving smoothly for the long haul.

Bob's Two Cents
Here at CARFIX, I always reckon it's best to replace those rotors when they're showing their age. Especially on vans like the Hyundai H-1, iLOAD, and iMAX that are always carrying precious cargo. The RDA RDA7460 is a solid choice for these models, giving you good bang for your buck. Swing by Bob's Shop for a yarn and let's get your van stopping like new!

Fitment Notes
This rotor is a perfect fit for various Hyundai H-1, H1, I800, iLOAD, and iMAX CRDi and i models from 2008 onwards. Just double-check your van's year, model, and engine to be 100% sure, as there can be sneaky differences even within the same model range.

---

🛠️ Bob's Pro Tip: Do the Job Right!
> GDB3297)](/parts/GDB3297) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.