CARFIX

RDA Brakes Standard Disc Brake Rotor Vented 255mm RDA742

RDA Brakes · Part number RDA742 · NZ$123.00 incl. GST

Toyota Celica brake rotors are vital for stopping safely. If your rotors are past it, CARFIX stocks RDA rotors.

Price

NZ$123.00 including GST. Part number RDA742.

Fits these vehicles

Description

Toyota Celica Disc Brake Rotor Replacement

> Celica rotors take a hammering, especially if you're giving it the beans. Over time, heat and friction can really do a number on them, leading to warping, cracks, or just plain wear and tear. Let's get those sorted!

Dodgy Rotor Symptoms
• Screeching like a banshee when you brake
• The brake pedal's vibrating like crazy
• Takes way too long to stop
• Rotors look like they've been attacked with a grinder

Will it pass a WOF?
Worn rotors are a quick way to fail a WOF here in NZ. They need to be above minimum thickness and free from major damage to pass the test.

DIY or Workshop?
Difficulty: 6/10
Estimated Time: 2-3 hours per axle
Tools Required: Jack and stands, lug wrench, socket set, torque wrench, brake cleaner, and potentially a brake caliper tool.

🛠️ Bob's "Get It Done Right" Companion Checklist
Before you start wrestling with those rotors, grab these must-haves to keep things safe and tidy:
• Safety First, Mate!: Chuck on some Safety Glasses to keep that brake dust out of your peepers, and grab some Nitrile Gloves to protect your hands from the grime.
• Brake Dust Be Gone: Give those new rotors a good blast with Brake Cleaner before you fit them. Gets rid of any manufacturing gunk.
• Caliper Grease: Smear a bit of anti-seize caliper grease on the contact points to keep things smooth and prevent future squealing.

Expert Recommendation
Dodgy rotors mean dodgy braking, which is a no-brainer for safety. Replacing them gives you peace of mind and restores that confident feel. Pop down to Bob's Shop, and we'll get your Celica stopping like new. Chur!

Fitment Notes
Double-check the rotor fits your exact Celica model and year (1989-1994), as sizes can vary. Always replace rotors in pairs (both front or both rear) for balanced braking.

---

🛠️ Bob's Pro Tip: Do the Job Right!
> Check out our compatible brake pads (part RDB422) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.