RDA Brakes Standard Disc Brake Rotor Vented 235mm
RDA Brakes · Part number RDA7249 · NZ$134.00 incl. GST
RDA Brakes Standard Disc Brake Rotor Vented 235mm by RDA Brakes, part number RDA7249.
Price
NZ$134.00 including GST. Part number RDA7249.
Fits these vehicles
Description
Swapping Out Your KIA RIO's Disc Brake Rotors — An RDA Guide
> Your KIA RIO's disc brake rotors are dead important for haulin' you up safely. Over time, they get worn down from all the friction with the pads, especially if you're doing a lot of start-stop driving in your KIA RIO 16V (2000-2005).
Spotting the Warning Signs
• Brakes sound like a pack of seagulls arguing? (Squealing or grinding)
• Brake pedal's doing the Macarena? (Vibration or pulsation)
• Taking longer to pull up than a cafe lunch queue?
• Rotors look like they've been attacked by a grinder?
• Pads wearing unevenly – one side thinner than the other?
WOF Worries?
Yep, dodgy disc brake rotors are a quick way to fail your WOF here in NZ. They need to be above the minimum thickness and in good nick to pass the test.
DIY or Hand it Over?
Difficulty: 6/10
Time Needed: 2-3 hours per axle
Gear You'll Need: Jack and stands, wheel brace, socket set, torque wrench, brake cleaner, caliper compressor tool.
🛠️ Bob's "Get It Done Right" Companion Checklist
• Safety First, Mates!: Never, ever get under a car that's only held up by a jack. Use proper axle stands – your life's worth it!
• Cleanliness is Next to Godliness: Brake dust is nasty stuff. Give everything a good blast with Brake Cleaner to keep it under control.
• Protect Your Hands: Keep those mitts clean and safe with some Nitrile Gloves – brake cleaner and skin don't mix well.
• Don't Forget the Lube: A smear of anti-seize caliper grease on the right spots will keep things moving smoothly and prevent squeaks.
Expert Recommendation
Worn brake rotors mean your KIA RIO won't stop as well as it should. Swapping them out keeps you safe and stops other brake bits from getting damaged. Bob @ CARFIX is always keen to point you in the right direction. Swing by Bob's Shop for a yarn!
Fitment Notes
Double-check it fits your specific KIA RIO year (2000-2005) and engine (16V). Also, make sure the rotor size and thickness match what you had before.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> GDB1024DT)](/parts/GDB1024DT) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.