RDA Brakes Standard Disc Brake Rotor Vented 262mm

RDA Brakes · Part number RDA7127 · NZ$159.00 incl. GST

Need new disc brake rotors for your trusty Nissan March or Bluebird Sylphy? These are your main squeeze for stopping safely, giving your brake pads the surface they need. RDA rotors are a reliable choice, and we've got 'em here at CARFIX.

Price

NZ$159.00 including GST. Part number RDA7127.

Fits these vehicles

• Nissan AD (2005+)
• Nissan AD (2005+)
• Nissan AD (2008+)
• Nissan Bluebird Sylphy (2005–2012)
• Nissan Bluebird Sylphy (2005–2012)
• Nissan Cube (2003–2008)
• Nissan Cube (2003–2008)
• Nissan Cube (2008–2012)
• Nissan Cube (2009–2012)
• Nissan Cube (2009+)
• Nissan Cube (2012+)
• Nissan Latio (2012+)
• Nissan March (2003–2005)
• Nissan March (2003–2010)
• Nissan March (2003–2010)
• Nissan March (2005–2010)
• Nissan March (2007–2010)
• Nissan March (2010–2015)
• Nissan March (2010–2020)
• Nissan March (2010+)
• Nissan Note (2006–2012)
• Nissan Note (2006–2013)
• Nissan Tiida (2004–2011)
• Nissan Tiida (2007–2013)

Description

Disc Brake Rotor Replacement: The Full Kiwi Guide
> Your Nissan AD or Cube's brake rotors are blimmin' important! They wear down over time from the pads rubbing, which means your stopping power might not be up to scratch – especially if you're battling Auckland traffic or cruising the winding roads down south. Let's get you sorted.

Spotting the Warning Signs
• Hear a squeal or grind when you hit the brakes?
• Feel a wobble or pulse through the pedal?
• Taking longer to pull up than usual?
• Rotors look like they've seen better days – scoring or damage?
• Pads wearing unevenly? That's a worry.

WOF Woes?
Worn rotors are a dead cert to fail a WOF here in NZ. They gotta be thick enough and in good nick to pass the test.

DIY or Pay a Pro?
Difficulty: 6/10
Time Needed: 2-3 hours per axle
Gear You'll Need: Jack and stands, spanners and sockets, torque wrench, brake cleaner, maybe a caliper tool.

🛠️ Bob's "Get It Done Right" Companion Checklist
Before you start yanking those old rotors off your Nissan, let's make sure you're set up for success, aye?
• Safety First, Mates! Never, ever get under a car that's only held up by a jack. Use proper axle stands – your life's worth it! And chuck on some Safety Glasses to keep the crud out of your peepers.
• Keep it Clean, Keep it Keen: Brake dust is nasty stuff. Grab a can of Brake Cleaner to blast away the muck from the calipers and new rotors. Trust me, your lungs will thank you.
• Protect Your Investment: A little Caliper Grease on the right spots (caliper pins, pad backing plates) will keep everything moving smoothly and prevent squeals. Plus, a new set of Nitrile Gloves will save your hands from looking like you've been wrestling a mechanic.

Expert Recommendation
Swapping out those rotors regularly is a no-brainer for keeping your brakes sharp, especially if you're always zipping around town in your Nissan March or Bluebird Sylphy.

Bob @ CARFIX is your man for sussing out exactly what you need. Pop into Bob's Shop for a yarn!

Fitment Notes
Double-check these rotors fit your exact Nissan model and year – they can be different sizes and shapes. Always do both sides (front or back) together for even braking. Some models, like the Cube, might have special rotor needs depending on the trim or when it was made.

---

🛠️ Bob's Pro Tip: Do the Job Right!
> GDB3332)](/parts/GDB3332) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.