
RDA Brakes · Part number RDA560B · NZ$191.00 incl. GST
Need new brake rotors for your Toyota Celica GT-FOUR or i Turbo (1994-1999)? These RDA rotors are a top pick for reliable stopping power.
NZ$191.00 including GST. Part number RDA560B.
Toyota Celica GT-FOUR/i Turbo Disc Brake Rotor Replacement Guide
> Your Celica's brake rotors are what your brake pads grip to slow you down. Over time, especially if you drive it hard like it's meant to be driven, those rotors can wear out, warp from the heat, or even crack. This guide will help you replace them.
Symptoms That Led You Here
• Your brake pedal feels like it's vibrating when you hit the brakes.
• You hear squealing or grinding noises.
• It takes longer to stop than it used to.
• You can see cracks or deep grooves on the rotors.
• Your brake pads are wearing unevenly.
Will it pass WOF?
Worn-out brake rotors are an instant WOF failure here in New Zealand. Your rotors need to be above the minimum thickness and without cracks to pass the test.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 2-3 hours per axle
Tools Required: Jack and stands, lug wrench, socket set, torque wrench, brake cleaner, rotor removal tool (optional)
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you even think about getting started, safety first, mate! Never, ever get under a car that's only supported by a jack. Use proper axle stands, yeah? Grab some Nitrile Gloves to keep the hands clean and protect them from the brake dust. Speaking of brake dust, give everything a good blast with Brake Cleaner – it's nasty stuff, so wear safety glasses! Finally, a little dab of anti-seize on the caliper bolts will make life easier next time.
Expert Recommendation
Don't muck around with dodgy brakes on your Toyota Celica GT-FOUR or i Turbo. Replacing those worn rotors is a no-brainer for safety and performance. Bob @ CARFIX is always on hand to help you work out exactly what part you need for your Celica. Make sure you head over to Bob's Shop for a chat!
Fitment Notes
Double-check that these rotors fit your specific Celica – year (1994-1999) and model (GT-FOUR, i Turbo). Make sure the rotor size matches what you had before.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> GDB3106)](/parts/GDB3106) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.