RDA Brakes Standard Disc Brake Rotor Vented 250mm
RDA Brakes · Part number RDA32 · NZ$50.00 incl. GST
RDA Brakes Standard Disc Brake Rotor Vented 250mm by RDA Brakes, part number RDA32.
Price
NZ$50.00 including GST. Part number RDA32.
Fits these vehicles
- Holden Jackaroo (1985–1988)
- Holden Jackaroo (1985–1988)
- Holden Rodeo (1978–1985)
- Holden Rodeo (1981–1982)
- Holden Rodeo (1982–1983)
- Holden Rodeo (1982–1983)
- Holden Rodeo (1983–1987)
- Holden Rodeo (1983–1988)
- Holden Rodeo (1983–1988)
- Holden Rodeo (1985–1988)
- Holden Shuttle (1982–1986)
- Holden Shuttle (1982–1986)
- Holden Shuttle (1982–1987)
- Holden Shuttle (1982–1987)
- Holden Shuttle (1983–1991)
- Holden Shuttle (1983–1991)
Description
Disc Brake Rotor Refresh — The RDA Way
> Disc brake rotors are crucial for keeping your vehicle safe on the road. If you're rocking an older Holden Rodeo or Jackaroo, especially one that's seen its fair share of tough conditions, those rotors can wear down, warp, or get all grooved up. That's when your braking can go south, and nobody wants that!
Spotting Trouble: Is It Time For a Change?
• Feeling a wobble or pulsing when you hit the brakes? That's a worry.
• Hearing squeals, scrapes, or just plain awful noises when you brake?
• Taking longer to pull up than usual?
• Seeing nasty grooves or discolouration on the rotor itself?
• Brake pedal feeling soft or spongy?
WOF Woes? Don't Get Caught Out!
Worn or dodgy brake rotors are a surefire way to fail your WOF. They check rotor thickness and surface, so get them sorted before you're gutted with a failed inspection. It's about safety, after all.
DIY or Get a Pro?
Difficulty: 6/10 (A good weekend project)
Estimated Time: 1-2 hours per wheel
Gear You'll Need: Jack, stands (never skip these!), wheel wrench, socket set, C-clamp or piston tool, torque wrench, wire brush, and definitely some brake cleaner. An impact wrench can be a lifesaver too.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking, grab these must-haves. Remember, safety first, then cleanliness, and lastly, a little bit of protection for the job:
• Safety Glasses: Keep those peepers safe from flying debris. Safety Glasses
• Nitrile Gloves: Keep your hands clean and avoid nasty chemicals. Nitrile Gloves
• Brake Cleaner: Blast away that brake dust and grime. Brake Cleaner
• Caliper Grease: A tiny dab of brake grease will ensure that your calipers operate smoothly and quietly. Caliper Grease
Bob's Two Cents
I (Bob @ CARFIX) reckon if your rotors are looking worse for wear, get them swapped out. For your Holden Rodeo or Jackaroo, RDA rotors are a solid choice. Always do both sides at once for even braking. Pop into Bob's Shop, and we'll sort you out with the right parts for your Holden Rodeo or Jackaroo.
Know Your Ride:
This RDA rotor fits a bunch of older Holden Rodeo (1978-1988), Holden Jackaroo (1985-1988), and Holden Shuttle (1982-1991) models. But double-check your exact year and model to be sure, as there can be differences.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> GDB345)](/parts/GDB345) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.