RDA Brakes Standard Disc Brake Rotor Vented 258mm
RDA Brakes · Part number RDA146 · NZ$128.00 incl. GST
Gotta stop safely, right? Disc brake rotors are mission-critical for your TOYOTA's braking.
Price
NZ$128.00 including GST. Part number RDA146.
Fits these vehicles
Description
Swapping Out Your TOYOTA's Disc Brake Rotors — RDA Style
> Disc brake rotors are what your brake pads grab onto to slow you down. Over time, they get worn, warped, or even cracked. This means less stopping power, and nobody wants that, aye?
What Clued You In?
• Brakes squealing like a pig or grinding like gears
• Your brake pedal's doing the Macarena
• Taking longer to pull up at the lights
• Rotors looking worse for wear – cracks, grooves, rust
WOF Woes?
Dodgy rotors are a surefire way to fail your WOF. They gotta be thick enough and free from cracks. Get 'em sorted!
DIY or Get a Pro?
Skill Level: 6/10 (Tricky but doable)
Time Needed: An hour or two per rotor
Gear You'll Need: Jack, stands, spanners, sockets, torque wrench, brake cleaner, wheel chocks
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking on those brakes, mate, safety first!
• Safety Glasses: Keep that brake dust out of your peepers. You only get one set!
• Nitrile Gloves: Brake dust and grease are minging. Keep your hands clean and protected.
• Brake Cleaner: Blast away all that built-up carbon dust before you start pulling things apart. Makes the job cleaner and easier.
• Caliper Grease: A wee dab of anti-seize on the caliper bolts will make life easier next time you're in there.
Never get under a car supported only by a jack! Use proper axle stands; your life's worth more than saving a few minutes. And dispose of your old brake parts responsibly – don't just chuck 'em in the ditch!
Expert Advice
Dodgy brake rotors? No good. Replacing them with quality RDA rotors sorts your stopping power right out. I'm always here to help you pick the right bits for your TOYOTA. Pop into Bob's Shop for a yarn!
Fitment Tips
Make sure your new rotors fit your TOYOTA model and year. Always do both sides at once for even braking.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your None Toyota , always install fresh brake pads. Check out our compatible RDA Brake Pads (SKU RDB281) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.