RDA Brakes Standard Disc Brake Rotor Solid 256mm
RDA Brakes · Part number RDA10 · NZ$179.00 incl. GST
Gotta keep those classic Aussie muscle cars like your Holden Torana or Sunbird pullin' up sharp, eh? Disc brake rotors are key for safe stoppin', givin' your brake pads the surface they need to do their job.
Price
NZ$179.00 including GST. Part number RDA10.
Fits these vehicles
- Holden Sunbird (1976–1978)
- Holden Sunbird (1978–1978)
- Holden Sunbird (1978–1978)
- Holden Sunbird (1979–1980)
- Holden Sunbird (1979–1980)
- Holden Torana (1974–1976)
- Holden Torana (1974–1976)
- Holden Torana (1974–1976)
- Holden Torana (1974–1978)
- Holden Torana (1975–1979)
- Holden Torana (1976–1978)
- Holden Torana (1976–1978)
- Holden Torana (1976–1978)
- Holden Torana (1976–1978)
- Holden Torana (1976–1978)
- Holden Torana (1976–1979)
- Holden Torana (1977–1978)
- Holden Torana (1977–1978)
- Holden Torana (1978–1979)
Description
Swapping Out Your Disc Brake Rotors — Featurin' RDA
> Your Holden Torana or Sunbird's disc brake rotors are real crucial for good stoppin' power. Over time, they cop a floggin' from friction, heat, and the elements, which can make your braking a bit dodgy, especially if you're givin' it heaps or doin' lots of stop-start driving.
Symptoms That Led You Here
• Brake pedal's vibratin' or pulsatin'
• Brakes are squealin' or grindin'
• Takin' longer to pull up than usual
• Rotors look scored, cracked, or rusty
• Brake pads are wearin' unevenly
Will it pass WOF?
Worn or rooted disc brake rotors are a common reason for failin' a WOF here in New Zealand. Your rotors need to be above the minimum thickness and not cracked or too damaged to pass the test.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 1-2 hours per rotor
Tools Required: Jack and stands, wheel wrench, socket set, torque wrench, brake cleaner, maybe a brake caliper tool.
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get stuck in, let's make sure you're sorted for the job. Safety first, always! Grab yourself some safety glasses to keep the grit out of your eyes when wrestling with those dusty metal tracks, and a decent pair of nitrile gloves will save your hands from gettin' covered in brake dust – nasty stuff! Give those new rotors and calipers a good spray with Brake Cleaner to get rid of any manufacturing grease. And don't forget a bit of [anti-seize caliper grease] to keep things smooth and prevent squeals.
Expert Recommendation
Worn brake rotors can seriously mess with your Holden Torana or Sunbird's safety and how well it stops. Putting in new ones makes sure you've got good, responsive brakes, which is super important for these classic cars. Bob @ CARFIX is always on hand to help you work out exactly what part you need for your Holden. Make sure you head over to Bob's Shop for a chat!
Fitment Notes
Double-check it fits your specific Holden Torana or Sunbird model and year. Some models might have different rotor sizes or setups. Always do both rotors at the same time to keep your braking even-stevens. Bob's always here to help if you're not sure.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> GDB7569)](/parts/GDB7569) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.