Champion Copper Plus Spark Plug

CHAMP · Part number RC8DMC · NZ$16.00 incl. GST

From your trusty Toyota Hiace to a sporty Porsche 911, spark plugs light the fire in your engine!

Price

NZ$16.00 including GST. Part number RC8DMC.

Fits these vehicles

• Alfa Romeo 145 (1994–1996)
• Alfa Romeo 145 (1994–1996)
• Alfa Romeo 145 (1998–2001)
• Alfa Romeo 146 (1994–1996)
• Alfa Romeo 147 (2001–2010)
• Alfa Romeo 147 (2001–2010)
• Alfa Romeo 155 (1995–1997)
• Alfa Romeo 156 (2000–2002)
• Alfa Romeo 156 (2000–2002)
• Alfa Romeo 156 (2002–2005)
• Alfa Romeo 156 (2002–2006)
• Alfa Romeo GT (2003–2010)
• Alfa Romeo Gtv (1995–2005)
• Alfa Romeo Gtv (1997–2003)
• Alfa Romeo Gtv (2003–2005)
• Alfa Romeo Spider (1995–2005)
• Alfa Romeo Spider (1998–2000)
• Alfa Romeo Spider (2003–2005)
• Audi A4 (2003–2004)
• Audi A4 (2003–2004)
• Audi A4 (2004–2005)
• Audi A4 (2004–2008)
• Audi Allroad (2002–2005)
• Bentley Arnage (1998–2013)
• BMW 3 (1987–1991)
• BMW 3 (1988–1991)
• BMW 3 (1989–1991)
• BMW 3 (1990–1993)
• BMW 3 (1991–1993)
• BMW 3 (1991–1994)
• BMW 3 (1991–1994)
• BMW 3 (1992–1995)
• BMW 3 (1993–1995)
• BMW 3 (1993–1998)
• BMW 3 (1993–1998)
• BMW 3 (1994–1995)
• BMW 3 (1994–1999)
• BMW 3 (1994–2000)
• BMW 3 (1995–1999)
• BMW 3 (1997–1999)

Description

Spark Plug Change-Out: Get Your Motor Humming with Champion
> Spark plugs? They're the little blighters that give your engine the spark it needs! Over time, they wear down thanks to the constant zap of electricity and combustion gunk. That can lead to misfires and a rough ride in everything from a Toyota Hiace to a flash Porsche 911.

Spotting Dodgy Spark Plugs
• Engine's misfiring, especially when you put your foot down
• Idling sounds rough as guts
• Fuel bills are suddenly sky-high
• Engine's a pain to start
• That pesky check engine light's glowing

Will it pass WOF?
Buggered spark plugs can cause your car to pump out too many emissions, which means you might fail your WOF. Best get them sorted!

DIY or Workshop?
Difficulty: 4/10
Time needed: Give yourself 1-2 hours, depending on how easy it is to get to the plugs.
Gear you'll need: Spark plug socket, ratchet, extension bar, torque wrench, and a spark plug gap tool (feeler gauge).

🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, a few things to keep in mind:
• Safety First, Mates! Engines get HOT. Make sure the engine is cold before starting. And disconnect the battery, just to be safe.
• Spark Plug Protection: Keep those new plugs pristine! Use the original packaging or a spark plug socket to prevent damage to the ceramic insulator or electrode. A damaged spark plug can cause engine misfires and poor performance.
• Blast that Carbon Dust: Give those spark plug holes a good blast with some Brake Cleaner before you pull the old plugs. Stops crud falling into the cylinders.
• Glove Up: Keep your hands clean and protected from grease and grime with a pair of Nitrile Gloves.

Expert Recommendation
Swapping out your spark plugs when you're supposed to is a no-brainer for keeping your engine running sweet and saving fuel, whether you're cruising in a Toyota Corona or tearing up the tarmac in a Lotus Esprit. Bob @ CARFIX is always here to help you find the perfect part for your ride. Pop into Bob's Shop for a yarn!

Fitment Notes
Make sure you're using the right spark plug type and gap for your engine. Check your car's service manual for the exact specs. Some engines, like those in the Porsche 911, can be a bit of a pain to get to the spark plugs.
Bob's the word!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this spark plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!

🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.