Ryco Filters · Part number R2940P · NZ$55.00 incl. GST
Gidday! Keep your Great Wall Cannon's engine humming sweet as with fresh oil filters – they're the key to keeping the muck out and the good times rolling, especially important for our hard-working Utes.
NZ$55.00 including GST. Part number R2940P.
Oil Filter Change-Out Guide — RYCO's Got Your Back
> Oil filters are like the kidneys of your Cannon's engine, stopping all the nasties from mucking up the works. For Great Wall Cannons, especially those Ute legends doing heavy lifting or hitting the dusty metal tracks, a decent oil filter is a no-brainer for keeping things running smoothly.
Spotting the Warning Signs
• Engine's lost its mojo
• Sounds a bit rough, eh?
• That oil light's giving you the stink eye
• Oil's looking more 'tar pit' than 'oil slick'
• Engine's running hotter than a cafe lunch left in the sun
WOF Worthy?
Yep, a good oil filter is key to a happy engine and cleaner emissions – both big ticks for your WOF check.
DIY or Workshop?
Difficulty: 4/10
Time Needed: 30-60 minutes
Gear You'll Need: Oil filter wrench, socket set, drain pan, fresh oil, gloves, and safety glasses.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking, a few quick things to keep in mind:
• Safety First, Mates: Never get under a car that's only held up by a jack. Use proper stands – your life's worth it!
• Cleanliness is Key: Give the area around the oil filter a good wipe down before you start. Stops any extra gunk from getting into your engine.
• Protect Your Patch: Use an oil drip tray – keeps the driveway clean and saves you from the Mrs' wrath.
• Lube It Up: A smear of fresh oil on the new filter's rubber seal helps it bed in nicely.
While you're at it, grab some Engine Flush Additives to give the old girl a good internal clean, some Oil Drip Trays to catch the spills, and some Heavy-Duty Hand Cleaner for afterwards. Trust me, your hands will thank you!
Expert Recommendation
Regular oil and filter changes are the golden rule for your Great Wall Cannon's engine. Bob @ CARFIX is always here to sort you out with the right part for your Cannon. Pop into Bob's Shop for a yarn!
Fitment Notes
Make sure you grab the right oil filter for your Cannon's model and engine. Check your manual or ask Bob @ CARFIX to be sure.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> EPLUS5W30005)](/parts/EPLUS5W30005) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Clean Workspace: Lay down an oil drip tray and microfibre towels under the oil drain plug.
• Gasket Inspection: Double check that the old oil filter's rubber O-ring came off with the filter, and pre-lube the new filter gasket with fresh oil before mounting.
• Clean Hands: Protect your hands from used engine oil with Nitrile Gloves.