Ryco Cartridge Oil Filter
Ryco Filters · Part number R2862P · NZ$56.00 incl. GST
Ryco Cartridge Oil Filter by Ryco Filters, part number R2862P.
Price
NZ$56.00 including GST. Part number R2862P.
Fits these vehicles
Description
Oil Filter Change: Keep That Engine Sweet! — RYCO Featured
> Oil filters are the unsung heroes, trapping gunk and keeping your engine oil clean. Change 'em regularly, especially if your Chery J3 or Land Rover Range Rover SDV8 sees a bit of tough love on the roads.
Symptoms That Led You Here
• Engine's not quite got its mojo anymore
• Sounds a bit rough, eh?
• Oil's looking like mud
• That pesky oil light's glaring at you
• Bits and bobs floating in the oil when you drain it
Will it pass WOF?
Too right! A clean oil filter is a no-brainer for a WOF. Keeps the engine healthy and the emissions down – both get the eagle eye.
DIY or Workshop?
Difficulty: 4/10
Estimated Time: 30-60 minutes
Tools Required: Oil filter wrench, socket set, drain pan, new oil, gloves
🛠️ Bob's "Get It Done Right" Companion Checklist
Right, before you get your hands dirty, let's make sure you're sorted.
• Safety First, Mates!: Never, ever get under a car supported only by a jack. Use proper Jack Stands. No exceptions!
• Keep it Clean: Engine flush additives are your friend before you drain the old oil. It helps loosen gunk and grime.
• Contain the Mess: Have an Oil Drip Tray ready to catch the old oil. Trust me, you don't want that stuff on your driveway.
• Hand Hygiene: Those oil filters can be grimy. You'll want some heavy-duty Hand Cleaner to scrub up afterwards.
• Wipe it Up: Keep a stack of rags handy for spills and drips. You can thank me later.
Expert Recommendation
Bob @ CARFIX reckons regular oil and filter changes are the best medicine for a happy engine. Pop into Bob's Shop for a yarn!
Fitment Notes
Make sure you grab the right oil filter for your specific Chery J3, Chery J11 or Land Rover Range Rover SDV8 model and engine. Check the service manual for the proper way to install it and how tight to do it up.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> HPR10001)](/parts/HPR10001) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Clean Workspace: Lay down an oil drip tray and microfibre towels under the oil drain plug.
• Gasket Inspection: Double check that the old oil filter's rubber O-ring came off with the filter, and pre-lube the new filter gasket with fresh oil before mounting.
• Clean Hands: Protect your hands from used engine oil with Nitrile Gloves.