Ryco Oil Filter Cartridge
Ryco Filters · Part number R2856P · NZ$72.00 incl. GST
Keep your LDV G10, LDV D90, MG GS, or MG HS T humming sweetly with a fresh oil filter!
Price
NZ$72.00 including GST. Part number R2856P.
Fits these vehicles
Description
Oil Filter Change-Up: RYCO Edition
> Oil filters are the unsung heroes, keeping the grunge out of your engine oil in tough vehicles like the LDV G10, D90, MG GS, and HS T. Give 'em a hard life, they do! Over time, these filters get choked up, starving your engine of the good stuff.
Uh-Oh Signs: Time for a New Filter
• Engine's lost its mojo?
• Sounds a bit rough, aye?
• That oil pressure light's glaring at ya.
• Oil's looking more like black sludge.
• Engine's running hotter than a summer's day.
Will it pass WOF?
A clean oil filter is a no-brainer for a happy engine and a WOF sticker. Keep it sorted!
DIY or Get a Pro?
Difficulty: 4/10
Time Needed: 30-60 minutes
Gear You'll Need: Oil filter wrench, socket set, drain pan, fresh oil, gloves (save those hands!)
🛠️ Bob's "Get It Done Right" Companion Checklist
• Safety First, Mates! Never, ever get under a car that's only propped up with a jack. Use proper axle stands – your life's worth more than a cafe lunch.
• Cleanliness Counts: Before you even think about touching that new filter, give the area around it a good wipe down. You don't want any crud falling into your engine.
• Protection is Key: Those oil filters can be a pain to get off! Safety glasses are a must.
• Lube It Up: Before you screw on the new filter, smear a little fresh oil on the rubber gasket. This helps it seal properly and makes it easier to remove next time.
• Don't Forget the Extras: Grab some Engine Flush Additives, an Oil Drip Tray, and some Heavy-Duty Hand Cleaner. You'll thank me later.
Bob's Two Cents
Keeping on top of oil filter changes is the best thing you can do for your LDV or MG. Pop into Bob's Shop – I'm always happy to help you find the perfect fit for your machine!
Fitment Notes
Double-check you've got the right oil filter for your LDV G10, LDV D90, MG GS, or MG HS T. And always peek at the manufacturer's specs for the right oil type and filter match.
Bob's waiting for your visit!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> HPR05005)](/parts/HPR05005) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Clean Workspace: Lay down an oil drip tray and microfibre towels under the oil drain plug.
• Gasket Inspection: Double check that the old oil filter's rubber O-ring came off with the filter, and pre-lube the new filter gasket with fresh oil before mounting.
• Clean Hands: Protect your hands from used engine oil with Nitrile Gloves.