CARFIX

Ryco Oil Filter Cartridge

Ryco Filters — Ryco Oil Filter Cartridge — part number R2720P

Ryco Filters · Part number R2720P · NZ$44.00 incl. GST

Keepin' your Ford Ranger, Everest, Mazda BT-50 or VW Amarok sweet as? An oil filter's the unsung hero, stopping all the gritty bits from causing mayhem.

Price

NZ$44.00 including GST. Part number R2720P.

Fits these vehicles

Description

Oil Filter Change-Up: RYCO's Got Your Back
> Oil filters are like the bouncers at the engine party, keeping out the rough stuff. Especially crucial for rigs like Ford Rangers, Everests, Mazda BT-50s and VW Amaroks that cop a beating on and off the tar seal.

Uh Oh, Time for a Change?
• Engine's not quite singing the same tune?
• Hearin' a bit of extra racket under the bonnet?
• That pesky oil pressure light's winkin' at ya?
• Oil lookin' more like mud than oil?
• Bits and pieces lookin' a bit worn out?

WOF Worthy?
Yep, as long as she's not leakin' and it's bolted on properly, you're all good for your WOF check.

DIY or Get a Pro?
Difficulty: 4/10 (Not too bad, mate!)
Time it'll take: 30-60 minutes (Give or take, depending on how many cafe lunch breaks you take).
What you'll need: Oil filter wrench, socket set, drain pan, gloves (don't want mucky hands!)

🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking, a little prep goes a long way. First up, safety glasses – no one wants oil in their peepers! Grab some heavy-duty Nitrile Gloves to keep those hands clean as a whistle. A can of engine flush additive will help clean out the inside of the engine before you drain the oil.

Don't forget an Oil Drip Tray to catch the old oil and some rags for any spills. Never get under a car supported only by a jack – always use proper stands!

Bob's Two Cents
Swapping out your oil filter regularly is a no-brainer for keeping your engine humming, especially if you're always towing or tackling the backblocks.

Fitment Notes
Double-check you've got the right oil filter for your engine and year. Your vehicle's manual is your best mate here. Head over to Bob's Shop for a yarn, and I'll sort you out with exactly what you need for your vehicle!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> HPR05005)](/parts/HPR05005) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Clean Workspace: Lay down an oil drip tray and microfibre towels under the oil drain plug.
• Gasket Inspection: Double check that the old oil filter's rubber O-ring came off with the filter, and pre-lube the new filter gasket with fresh oil before mounting.
• Clean Hands: Protect your hands from used engine oil with Nitrile Gloves.