
Ryco Filters · Part number R2636P · NZ$110.00 incl. GST
Ryco Cartridge Oil Filter by Ryco Filters, part number R2636P.
NZ$110.00 including GST. Part number R2636P.
Oil Filter Change-Out: RYCO's Got Your Back!
> Oil filters: they're the difference between a happy BMW engine and a costly repair bill. Over time, they get chocka-block with gunk, starving your engine of clean oil. Especially in demanding machines like the X5 and X3. Best to catch it early, eh?
What Gave It Away?
• Engine's lost its mojo?
• Sounds a bit rough?
• Oil light's playing up?
• Oil's looking like mud?
• Running a bit hot, mate?
WOF Worthy?
Nah, a bung oil filter won't fail ya directly at WOF time. But! If it leads to your engine chucking out too many fumes, that *will* cause issues.
DIY or Get a Pro?
Difficulty: 4/10
Time Needed: Half an hour to an hour.
Gear You'll Need: Oil filter wrench, socket set, oil pan, fresh oil, gloves, safety sunnies.
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get your hands dirty, let's sort out the essentials. Safety first, always! Grab yourself some Nitrile Gloves – keeps the hands clean from that old oil. And definitely don't forget the Safety Glasses, you don't want any splashes in the eyes. Now, while you're at it, consider a can of Engine Flush Additives to give the old girl a proper internal clean before chucking in the new oil. A good Oil Drip Tray will save your driveway from looking like a disaster zone, and a stack of rags is always handy for the inevitable spills. Remember, never get under a car supported only by a jack! Use proper stands, yeah?
Bob's Two Cents
Regular oil and filter changes: cheap insurance for your Bimmer! A clean filter means happy engine parts, less wear and tear. Pop into Bob's Shop, and we'll sort you out with the perfect bit for your BMW.
Important Fitting Notes
Double-check you've got the right filter for your exact BMW model and engine. Your owner's manual or the CARFIX website is your best mate here.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> HPR05005)](/parts/HPR05005) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Clean Workspace: Lay down an oil drip tray and microfibre towels under the oil drain plug.
• Gasket Inspection: Double check that the old oil filter's rubber O-ring came off with the filter, and pre-lube the new filter gasket with fresh oil before mounting.
• Clean Hands: Protect your hands from used engine oil with Nitrile Gloves.