CARFIX

Ryco Cartridge Oil Filter

Ryco Filters — Ryco Cartridge Oil Filter — part number R2374P

Ryco Filters · Part number R2374P · NZ$111.00 incl. GST

Keeping your Toyota Dyna or Toyoace humming sweet? Oil filters are your first line of defence, trapping all the gritty bits that can gunk up your engine.

Price

NZ$111.00 including GST. Part number R2374P.

Fits these vehicles

Description

Oil Filter Change: Keeping Your Toyota Dyna or Toyoace Sweet with RYCO
> Oil filters are like the kidneys of your engine, especially crucial for hardworking commercial vehicles like the Toyota Dyna and Toyoace. They tirelessly remove the nasty contaminants from the oil, preventing premature wear and tear. These trucks often face tough conditions, so a good filter is a no-brainer.

Warning Signs You Might Have Found Yourself Here
• Engine's not feeling as grunty as it used to
• Sounds a bit rough, eh?
• That pesky oil pressure light's on
• Oil looks like it's been down a dusty metal track
• Seeing wear on engine parts when you peek under the hood

Will it pass WOF?
She'll be right, as long as there aren't any oil leaks and it's bolted on properly.

DIY or Workshop?
Difficulty: 4/10
Time Needed: 30-60 minutes
Gear You'll Need: Oil filter wrench, socket set, drain pan, gloves

Expert Advice
Swapping out your oil filter regularly is like giving your Toyota Dyna or Toyoace a regular check-up. It keeps everything running smoothly, prevents expensive damage down the line, and ensures your engine is getting the love it deserves. The RYCO filter (R2374P) is a top pick, but we also stock alternatives. Bob at CARFIX is your go-to for sussing out the exact part you need for your trusty Toyota. Pop into Bob's Shop for a yarn!

🛠️ Bob's "Get It Done Right" Companion Checklist
• Safety First, Mates! Never get under a vehicle supported *only* by a jack. Use proper jack stands – your life's worth it!
• Cleanliness is Key: Blast away any old oil and grime with a trusty Brake Cleaner spray before you start. Keeps things tidy and helps you spot any leaks later on.
• Hand Protection: Don't turn your hands into a mechanic's nightmare. Grab a pair of Nitrile Gloves to keep the oil and muck off your skin.
• Oil Spill Prevention: Have an oil drip tray handy to catch any spills. Makes cleanup a breeze and keeps the garage floor sparkling (well, less oily, anyway).
• Engine Flush: Before you drain the old oil, consider adding an engine flush additive. This helps to remove stubborn deposits and sludge, preparing the engine for fresh, clean oil.
• Filter Lubrication: Before screwing on the new filter, smear a dab of fresh engine oil on the filter gasket. This ensures a good seal and prevents the gasket from sticking.

Fitment Notes
Double-check you've got the right filter for your specific Toyota Dyna or Toyoace. Engine types vary, so always peek at the manufacturer's specs and follow the proper steps to install it.

Bob's your uncle for all things CARFIX!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> HPRD15005)](/parts/HPRD15005) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Clean Workspace: Lay down an oil drip tray and microfibre towels under the oil drain plug.
• Gasket Inspection: Double check that the old oil filter's rubber O-ring came off with the filter, and pre-lube the new filter gasket with fresh oil before mounting.
• Clean Hands: Protect your hands from used engine oil with Nitrile Gloves.