NGK Spark Plugs · Part number PGR5C-11 · NZ$71.00 incl. GST
NGK Platinum Spark Plug by NGK Spark Plugs, part number PGR5C-11.
NZ$71.00 including GST. Part number PGR5C-11.
Cracking the Spark Plug Code: A Replacement Guide with NGK
> Spark plugs deliver the zap that gets your engine firing on all cylinders. Over time, they get a hiding from heat, wear, and carbon, leading to misfires and a rough ride in your trusty rigs like the Toyota Hiace and Hyundai Santa Fe.
Uh Oh... Sounds Like You've Got These Symptoms?
• Engine's misfiring, especially when putting your foot down
• Idling like a bag of spanners
• Fuel economy down the drain
• Engine's being a pain to start
• That pesky check engine light's on
WOF Worthy?
Yep, she'll pass her WOF as long as the engine's humming nicely and not chucking out heaps of emissions because of dodgy plugs. Misfires are a definite no-no at WOF time.
DIY or Hand it to the Pros?
Difficulty: 4/10
Estimated Time: 1-2 hours
Gear You'll Need: Spark plug socket, ratchet, extension bar, torque wrench, and a spark plug gap tool.
Expert Advice
Swapping out your spark plugs when you're supposed to is a no-brainer for keeping your engine purring and your fuel bill down. Bob at CARFIX is your man to sort out exactly what you need for your beast. Swing by Bob's Shop for a yarn!
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking, a little prep goes a long way. Grab some Brake Cleaner to blast away any carbon buildup around the spark plug wells – keeps things clean and prevents muck from falling into the cylinders. Safety first, team – pop on some Safety Glasses to keep the grit out of your eyes, and Nitrile Gloves to keep your hands clean. A little dab of anti-seize grease on the new spark plug threads will make life easier next time around.
Fitment Notes
Make sure you're using the right spark plug and gap for your engine. Check your service manual for the exact specs, especially for different Toyota Hiace and Hyundai Santa Fe models. Bob's always here to help if you're unsure!
Swing by Bob's shop for a yarn about your spark plugs!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this spark plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!
🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.