CARFIX

Kelpro Engine Mount

Kelpro — Kelpro Engine Mount — part number MT8128

Kelpro · Part number MT8128 · NZ$81.00 incl. GST

For your Peugeot 406, Citroen Xsara, or Peugeot 307, keeping that engine securely in place and vibrations at bay is crucial for a smooth ride, and this KELPRO engine mount is just the ticket, manufactured to OE specifications to sort you right out.

Price

NZ$81.00 including GST. Part number MT8128.

Fits these vehicles

Description

Give Your European Ride a Smooth Run: KELPRO Engine Mounts
> Engine mounts are the unsung heroes under the bonnet, keeping your engine snug against the chassis and soaking up all those vibrations. For European beauties like the Peugeot 406, Citroen Xsara, and Peugeot 307, these mounts can wear out over time, leading to a bit of a ruckus in the cabin as the rubber or hydraulic bits degrade.
How to Spot a Wobbly Engine
• Feeling a bit too much rumble in the steering wheel, floor, or seats?
• Hearing clunks or bangs when you hit the gas, brake, or change gears?
• Popping the bonnet and seeing your engine dance a jig when you rev it?
• Is your car shaking more than usual when you're just sitting at idle?
WOF Woes?
Yep, a dodgy engine mount can definitely put a spoke in your WOF plans. If your engine's moving around too much, it's a safety concern and a likely fail. Sorting it out means a smoother drive and a tick for your WOF!
DIY or Call in the Cavalry?
Difficulty: 6/10 (Can be a bit fiddly depending on how tucked away the mount is).
Estimated Time: 2-4 hours per mount.
Tools Required: Jack and jack stands, engine support hoist or brace, socket set, wrenches, torque wrench, pry bar (optional).

🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, team! Before you dive in, let's make sure you've got everything you need for a safe and sound engine mount swap. Think of this as your pre-flight check for a smooth landing:
• Safety First, Always: Never, ever get under a car that's only supported by a jack! Make sure you've got sturdy Jack Stands in place. And for those stubborn, rusty bolts that love to put up a fight, a good spray of Rust Penetrant can be a real lifesaver.
• Keep It Clean & Protected: You'll want some decent Workshop Rags on hand to mop up any spills. And for keeping your mitts clean and protected from grease and grime, a pair of tough Nitrile Gloves is a no-brainer.

Bob's Hot Tip
Bob here at CARFIX always says, don't put off replacing those worn engine mounts! It's not just about a comfier ride; it stops other bits and bobs, like your exhaust or other engine components, from taking a hammering. This KELPRO A1182858 mount is manufactured to OE specifications, a solid choice for your Peugeot or Citroen. We've also got a heap of other quality engine mount brands to fit all sorts of budgets and vehicles. Pop in and see Bob at CARFIX anytime; I'm always keen for a yarn and to help you find precisely what your European ride needs. Let's get you sorted!
Fitment Notes
This KELPRO engine mount is a good fit for specific Peugeot 406 (1996-2004), Citroen Xsara (2001-2005), and Peugeot 307 (2003-2005) models. Always double-check with your vehicle's exact specs to make sure it's the right match.

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this engine mount, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!

🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.