Kelpro Engine Mount
Kelpro · Part number MT7145 · NZ$219.00 incl. GST
Right then, for your European beauty like a VW Golf, Audi A3, or a trusty Passat, engine mounts are the unsung heroes that keep your engine snug and happy, soaking up all those bumps and rumbles for a smooth, quiet ride.
Price
NZ$219.00 including GST. Part number MT7145.
Fits these vehicles
- Audi A3 (2001–2003)
- Audi A3 (2003–2007)
- Audi A3 (2003–2008)
- Audi A3 (2003–2008)
- Audi A3 (2003–2009)
- Audi A3 (2003–2010)
- Audi A3 (2003–2012)
- Audi A3 (2003–2012)
- Audi A3 (2004–2007)
- Audi A3 (2004–2008)
- Audi A3 (2004–2009)
- Audi A3 (2004–2010)
- Audi A3 (2004–2012)
- Audi A3 (2004–2012)
- Audi A3 (2004–2012)
- Audi A3 (2004–2013)
- Audi A3 (2004–2013)
- Audi A3 (2004–2013)
- Audi A3 (2004–2013)
- Audi A3 (2005–2008)
- Audi A3 (2005–2008)
- Audi A3 (2005–2013)
- Audi A3 (2006–2008)
- Audi A3 (2006–2008)
- Audi A3 (2006–2008)
- Audi A3 (2006–2008)
- Audi A3 (2006–2012)
- Audi A3 (2006–2013)
- Audi A3 (2008–2009)
- Audi A3 (2008–2010)
- Audi A3 (2008–2013)
- Audi A3 (2008–2013)
- Audi A3 (2009–2012)
- Audi A3 (2009–2012)
- Audi A3 (2009–2013)
- Audi A3 (2009–2013)
- Audi A3 (2009–2013)
- Audi A3 (2010–2012)
- Audi A3 (2010–2013)
- Audi A3 (2011–2013)
Description
Engine Mounts: Keeping Your Engine Happy and Your Ride Smooth with KELPRO
> G'day mate! Engine mounts are key players, linking your engine and gearbox to the car's frame. Over time, especially in European models like your VW Golf, Audi A3, or VW Passat, the rubber or fluid inside these mounts can just get a bit knackered from all the heat and vibrations. When that happens, things can get a bit noisy and rough.
How to Spot a Worn-Out Mount
• Your engine's doing a bit of a dance, especially when you hit the gas or brake.
• Feeling a shiver through the steering wheel, floor, or even your seat? That's a sign.
• Hearing a grumpy 'clunk' or 'bang' when you change gears or go over those speed bumps?
• Things looking a bit out of whack under the bonnet? Misaligned engine bits can cause bigger headaches down the track.
Will it pass WOF?
If your engine mounts are really giving up the ghost, your engine could be moving around way too much. That's a red flag for your WOF, as it can mess with your steering, braking, and general control. Best to get 'em sorted for safety and to keep everything legit.
Fancy a DIY or Workshop Job?
Difficulty: 6/10 (Give it a go, but be prepared!)
Estimated Time: 2-4 hours (per mount – grab a cuppa halfway through!)
Tools Required: Your trusty jack and stands (safety first!), a decent socket set, wrenches, an engine support bar or hoist (makes life heaps easier), and a torque wrench to get things just right.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive under the bonnet, Bob's got a few pro tips and essentials to make sure your engine mount replacement goes smoothly and safely:
• Safety First, Always: Never, ever get under a car that's only supported by a jack! Use proper jack stands. And protect your peepers with some safety glasses – you never know what might drop.
• Keep it Clean: Have some Workshop Rags handy for any spills or to wipe down greasy hands.
• Protect Your Paws: A good pair of heavy-duty nitrile gloves will keep your hands clean and protected from grime and sharp edges.
• Free Up Those Stubborn Bolts: Old bolts can be a real pain. A squirt of Rust Penetrant a bit beforehand can work wonders, letting those bolts loosen up without a fight.
• Grease it Up (Where Needed): While not typically for engine mounts themselves, if you're doing other work nearby, a bit of Caliper Grease for brake components can be useful.
Expert Recommendation
Bob here at CARFIX always says, if your engine mounts are looking a bit sad, get 'em replaced! It'll bring back that comfy ride and stop other bits of your car from getting damaged. This KELPRO A1212673 engine mount is made to original equipment specs, so it's tough as nails and great at soaking up vibrations for your Volkswagen or Audi. Pop into Bob's Shop for a yarn – I'm always keen to help you figure out exactly what your Volkswagen or Audi needs!
Fitment Notes
This engine mount is all good for specific Volkswagen Golf (2003-2013), Audi A3 (2009-2013), and Volkswagen Passat (2005-2014) models. Always double-check with your vehicle's exact specs to be sure it's the right fit.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this engine mount, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!
🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.