NGK Iridium Spark Plug

NGK Spark Plugs · Part number LZFR6AI · NZ$39.00 incl. GST

Keep your Mitsubishi Lancer, Grandis, or Airtrek humming sweet as with fresh spark plugs!

Price

NZ$39.00 including GST. Part number LZFR6AI.

Fits these vehicles

• Mitsubishi Airtrek (2004–2006)
• Mitsubishi Grandis (2004–2011)
• Mitsubishi Grandis (2004–2011)
• Mitsubishi Lancer (2004–2007)
• Mitsubishi Lancer (2005–2008)
• Mitsubishi Lancer (2005–2013)

Description

Spark Plug Swap-Out: Get Your Mitsubishi Firing on All Cylinders!
> Spark plugs are the unsung heroes in your Mitsubishi Lancer, Grandis, or Airtrek's engine. When they get past it, you might notice rough idling or a bit of a stutter. Keep your ride happy with a fresh set.

Spotting the Signs of Tired Spark Plugs
• Engine's misfiring, giving you a rough idle and hesitation.
• Your fuel bill's lookin' a bit scary.
• Struggling to get the engine started, especially on those frosty mornings.
• That pesky check engine light's decided to say g'day.
• Acceleration's about as exciting as watching paint dry.

Will it pass WOF?
A smooth-running engine with good emissions is key for that WOF. Misfires from dud spark plugs? That's a no-go, mate.

DIY or Hand It Over?
Difficulty: 4/10
Estimated Time: 1-2 hours
Gear You'll Need: Spark plug socket, ratchet, extension bar, torque wrench, spark plug gap tool.

Expert's Two Cents
Worn spark plugs can really take the shine off your Mitsubishi's performance and send your fuel costs sky-high. Swapping them out with quality NGK plugs will get things running smoothly again. Bob's always around to point you in the right direction. Pop into Bob's Shop for a yarn!

🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get cracking, let's make sure you're set up for success. Safety first, always!
• Safety Glasses: Protect those peepers from any stray bits. Safety Glasses
• Nitrile Gloves: Keep your hands clean and away from any grime. Nitrile Gloves
• Spark Plug Socket: A proper spark plug socket with a rubber insert is crucial to protect the delicate ceramic insulator of the new plugs during installation.
• Torque Wrench: Don't overtighten! Spark plugs need to be snug, not Hulk-tight. Torque to spec to avoid damaging the threads in your engine block. Refer to your vehicle's service manual for the correct torque setting.
• Anti-Seize Compound: A tiny dab of anti-seize on the new spark plug threads will make removal easier next time. Just a tiny dab!

Fitment Notes
Make sure you've got the right spark plug gap for your Mitsubishi Lancer, Grandis, or Airtrek. Check your car's manual for the recommended setting.

Bob's word: happy motoring, folks!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this spark plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!

🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.