
NGK Spark Plugs · Part number LFR6A-11 · NZ$47.00 incl. GST
NGK STD V-Groove Resistor Spark Plug by NGK Spark Plugs, part number LFR6A-11.
NZ$47.00 including GST. Part number LFR6A-11.
Spark Plug Replacement: The NGK Way
> Spark plugs are the unsung heroes in your petrol engine, sparking the bang that gets you moving. Over time, they wear out, causing misfires, guzzling gas, and rough running – especially if you're towing with your Nissan Patrol or doing the daily grind in a Suzuki SX4.
Spotting the Warning Signs
• Engine's misfiring, especially when you put your foot down
• Fuel economy's gone down the drain
• Idling's rough as guts
• Engine's a bugger to start
• Check engine light's on
WOF Worthy?
Yep, as long as the engine's purring like a kitten and not chucking out too much smoke. Misfires from dodgy spark plugs are a no-no for a WOF.
DIY or Get a Pro?
Difficulty: 4/10
Time needed: 1-2 hours
Gear you'll need: Spark plug socket, ratchet, extension bar, torque wrench, spark plug gap tool.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, grab these must-haves to keep things safe and smooth:
• Safety First: Always wear safety glasses to protect your peepers from any stray bits. No one wants a trip to the eye doctor!
• Glove Up: Keep your mitts clean and protected with a pair of nitrile gloves. Trust me, your hands will thank you.
• Spark Plug Socket: Getting the right socket to remove the spark plugs is a must.
Expert Recommendation
Worn spark plugs can really mess with your engine's mojo and drink more gas than a V8 at the drags, especially in family wagons like the Hyundai Santa Fe and Kia Sportage. Slapping in fresh NGK spark plugs (SKU LFR6A-11) from CARFIX can bring back the power and save you coin at the pump. Bob at CARFIX is your go-to for sussing out the right part for your ride. Pop into Bob's Shop for a yarn!
Fitment Notes
Make sure you've got the right spark plug for your engine code – thread size, length, and heat range matter. Check your service manual or ask Bob at CARFIX to be sure, especially for those tricky Nissan and Suzuki models.
Bob's always here to lend a hand, so give us a yell!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this spark plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!
🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.