TRW DTEC Ceramic Brake Pads Set (DB1953)

TRW · Part number GDB7770DT · NZ$166.00 incl. GST

Need new brake pads for your Honda Accord, including the Hybrid?

Price

NZ$166.00 including GST. Part number GDB7770DT.

Fits these vehicles

• Honda Accord (2003–2005)
• Honda Accord (2007–2012)
• Honda Accord (2007–2012)
• Honda Accord (2008–2015)
• Honda Accord (2008–2015)
• Honda Accord (2008–2015)
• Honda Accord (2008–2015)
• Honda Accord (2008–2015)
• Honda Accord (2008+)
• Honda Accord (2013–2016)
• Honda Accord (2013+)

Description

Swapping Out Your Honda Accord Brake Pads — TRW Edition
> Brake pads, eh? They're what stops your Honda Accord, converting all that forward motion into heat when you hit the brakes. They wear down over time, especially if you're tackling those tough Auckland traffic jams or cruising the open roads. Letting them go too long is asking for trouble, and nobody wants a prang, right?
Spotting the Warning Signs
• Hear a squeal or a nasty grinding when you brake?
• Brakes feel weak or the pedal feels soft?
• Feel a wobble in the steering wheel or pedal when stopping?
• Pads look thin (less than 3mm of material left)?
• Dashboard warning light's on (if your Accord's got one)?
WOF Woes?
Worn brake pads are a WOF failure, mate. No question. You need decent pads to pass, so get them sorted!
DIY or Get a Pro?
Skill Level: 6/10 (A good weekend job)
Time Needed: An hour or two per axle
Gear You'll Need: Jack, axle stands, wheel brace, G-clamp or piston compressor tool, socket set, torque wrench, and some brake cleaner. A wire brush might be handy too.
🛠️ Bob's "Get It Done Right" Companion Checklist
• Safety First, Mates! Never, ever get under a car supported only by a jack. Use proper axle stands! And chuck on some Safety Glasses to keep the brake dust out of your peepers.
• Keep It Clean: Brake dust is nasty stuff. Give the area a good blast with some Brake Cleaner before you start pulling things apart. It'll make the job cleaner and safer.
• Protect Your Hands: Those brake components can be sharp and grimy. A pair of Nitrile Gloves will keep your hands clean and protected.
• Grease is the Word: When reassembling, use a dab of anti-seize Caliper Grease on the caliper bolts to prevent them from seizing up later. Makes the next brake job a breeze!
Bob's Two Cents
I reckon you should swap out those brake pads the moment you see any of those warning signs. Don't skimp on safety! TRW pads are a solid choice, known for being reliable and lasting well, perfect for your daily commute. Pop into Bob's Shop and we'll sort you out with the right parts for your Honda Accord. Let's get your brakes sorted, eh?
Fitment Notes
These pads are made for a range of Honda Accord models from '03 to '16, including the Hybrids and V6s. Just double-check your exact year and model to be sure they're the right fit. Specs can be different, even within the same model range.

---

🛠️ Bob's Pro Tip: Do the Job Right!
> DBA2510X)](/parts/DBA2510X) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.