TRW · Part number GDB771 · NZ$122.00 incl. GST
TRW Brake Pad Set Inc. Wear Sensor by TRW, part number GDB771.
NZ$122.00 including GST. Part number GDB771.
Brake Pad Replacement: The TRW Way
> Brake pads are the unsung heroes of your braking system, working hard every time you slow down. Over time, they wear out, which means less stopping power – especially crucial for keeping your classic Morgan Plus Eight or Wolseley 18/85 under control. Don't get caught out at your WOF check!
Spotting the Warning Signs
• Hear a squeal or grind when you hit the brakes?
• Brakes feeling a bit soft or taking longer to stop?
• That pesky brake pad warning light's lit up on the dash?
• Had a peek and the pads look worn or damaged?
• Pads wearing unevenly? Could be a caliper issue.
WOF Woes?
Worn brake pads are a dead cert for a WOF failure here in NZ. Your pads need to be above the minimum thickness to keep you safe on the roads.
DIY or Get a Pro?
Difficulty: 6/10
Time Needed: 2-4 hours (depending on how handy you are)
Gear You'll Need: Jack and stands, wrench and socket set, brake cleaner, C-clamp or brake spreader tool.
Expert Advice
Worn brake pads put a dent in your classic's safety. New pads mean better braking and protect other parts from damage. TRW pads are a solid choice, but CARFIX has options for every budget. Bob @ CARFIX is your go-to for figuring out exactly what you need for your Morgan or Wolseley. Pop into Bob's Shop for a yarn!
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, a few things to keep in mind to keep things safe and tidy.
• Safety First, Mates!: Brakes are critical. If you're not 100% confident, get a qualified mechanic to do the job. Never, ever get under a car supported only by a jack – use proper stands!
• Keep it Clean: Brake dust is nasty stuff. Give your calipers and rotors a good blast with some Brake Cleaner to get rid of it before you start.
• Protect Yourself: Wear safety glasses to keep dust and debris out of your eyes, and grab some Nitrile Gloves to keep your hands clean.
• Lube It Up: A little dab of anti-seize caliper grease on the caliper pins and brake pad contact points keeps everything moving smoothly and prevents squealing.
Fitment Notes
Double-check those pads fit your exact Morgan or Wolseley model and year. Brake systems and pad types can vary. Always replace pads in pairs (both sides) for even braking. Bob's your uncle!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these brake pads, don't skimp on proper workshop preparation and safety products. Doing the job right the first time protects your investment, saves massive workshop labor fees, and guarantees a quiet, smooth ride!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.