TRW DTEC Ceramic Brake Pads Set (DB1328)

TRW · Part number GDB770DT · NZ$124.00 incl. GST

For your hard-working Toyota Hiace or Dyna, these TRW Brake Pads are the real deal, converting all that kinetic energy into stopping power, and we've got 'em.

Price

NZ$124.00 including GST. Part number GDB770DT.

Fits these vehicles

• Daihatsu Delta (1982–1992)
• Toyota Camroad (2001+)
• Toyota Camroad (2007+)
• Toyota Commuter (2004–2007)
• Toyota Commuter (2013+)
• Toyota Dyna (1996–1999)
• Toyota Dyna (1996–1999)
• Toyota Dyna (1996–1999)
• Toyota Dyna (2001–2004)
• Toyota Dyna (2001+)
• Toyota Dyna (2003–2004)
• Toyota Dyna (2003+)
• Toyota Dyna (2006+)
• Toyota Dyna (2006+)
• Toyota Dyna (2006+)
• Toyota Dyna (2009+)
• Toyota Dyna 100 (1985–1995)
• Toyota Dyna 100 (1995–2001)
• Toyota Dyna 150 (1996–1999)
• Toyota Dyna 150 (1999–2001)
• Toyota Dyna 150 (1999–2001)
• Toyota Granvia (1995–2002)
• Toyota Granvia (1995–2002)
• Toyota Granvia (1995–2002)
• Toyota Granvia (1995–2004)
• Toyota Granvia (1995–2004)
• Toyota Hiace (2001–2004)
• Toyota Hiace (2001–2006)
• Toyota Hiace (2001–2006)
• Toyota Hiace (2001–2006)
• Toyota Hiace (2001–2006)
• Toyota Hiace (2001–2006)
• Toyota Hiace (2001–2006)
• Toyota Hiace (2005+)
• Toyota Hiace (2006–2012)
• Toyota Hiace (2006–2012)
• Toyota Hiace (2006–2012)
• Toyota Hiace (2006–2012)
• Toyota Hiace (2006+)
• Toyota Hiace (2017+)

Description

Brake Pads: Keeping Your Hiace or Dyna Stopping Sweet
> Alright, let's talk brake pads – these little heroes are the unsung champions of your commercial rig, especially if you're hauling gear or navigating the urban jungle. They're designed to wear down, sure, but when they do, your stopping power takes a hit. We're all about keeping your Toyota Hiace or Dyna performing its best, so let's get those brakes sorted!
Signs Your Brakes Are Having a Bit of a Whinge
• Hearing squeals or grinding noises when you hit the anchors.
• Feeling like you need a longer run-up to stop.
• That steering wheel or brake pedal giving you the shakes when you brake.
• A brake pedal that feels a bit too soft or spongy.
• You can actually see the pads are getting thin (less than 3mm of friction material left).
• That pesky brake warning light has popped up on your dash.
Will Your Rig Pass Its WOF?
Short answer: Nah, mate. Worn brake pads are a big no-no for your Warrant of Fitness. They're a safety hazard, and the WOF folks are pretty strict about your braking system being up to snuff. Get 'em sorted before inspection day!
DIY or Call in the Pros?
Difficulty: 6/10 (A bit of a mission, but doable)
Estimated Time: 1-2 hours per axle (grab a cuppa halfway through)
Tools Required: Jack, trusty jack stands (safety first!), lug wrench, C-clamp or brake caliper piston compressor, socket set, open-end wrenches, brake cleaner, torque wrench, safety glasses, gloves.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive into a brake job, make sure you've got these bits and bobs on hand to make the job easier, safer, and cleaner:
• Brake Cleaner: Essential for blasting away all that carbon dust and grime for a clean surface. Grab some Brake Cleaner.
• Anti-Seize Caliper Grease: A must-have for those caliper pins to ensure smooth operation and prevent seizing.
• Safety Glasses: Protect those peepers from flying dust and debris. Find your pair here: Safety Glasses.
• Heavy-Duty Nitrile Gloves: Keep your hands clean and protected from brake dust and grease. Stock up on Nitrile Gloves.
• Jack Stands: Seriously, never, ever get under a car relying only on a jack! Always use proper jack stands.
Expert Recommendation from Bob @ CARFIX
Bob reckons you should always swap out those brake pads as soon as they start showing wear. It's all about keeping your Hiace stopping sharp and safe, especially with all the hard yakka it does. These TRW pads? Top-notch, known for handling tough conditions like a champ. If you're scratching your head trying to figure out the right part for your Toyota Hiace or Dyna, just cruise on over to Bob's Shop for a yarn – he'll get you sorted!
Fitment Notes
These pads are designed for a whole bunch of Toyota Hiace, Regius Ace, Dyna, and Toyoace models from '89 onwards. Because there are so many variations in these commercial beasts, it's super important to double-check the exact fitment using your vehicle's specific year, model, and engine details. Don't want any surprises when you're halfway through the job, eh?

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, don't skimp on fresh rotors. Check out our compatible TRW Disc Brake Rotors (SKU DF1927S) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.