TRW · Part number GDB7212 · NZ$339.00 incl. GST
Need new brake pads for your Toyota Dyna 300 or 400 series? These TRW pads are just the ticket for keeping your workhorse stopping safely, even when fully loaded.
NZ$339.00 including GST. Part number GDB7212.
Replacing Your Toyota Dyna's Brake Pads – TRW Edition
> Brake pads are what stops your Toyota Dyna or Toyoace from becoming a runaway trolley. They turn all that forward motion into heat when you hit the brakes. Being a commercial vehicle, your Dyna's pads are going to wear faster than your average cafe cruiser, so it's crucial to keep an eye on them for safety's sake.
Spotting the Warning Signs
• Hear a squeal or a nasty grinding sound when you brake?
• Is your Dyna taking longer to pull up than usual?
• Dashboard warning light screaming at you?
• Had a peek and the pads look thinner than a slice of cheese?
• Pads wearing unevenly? Could be a sticky caliper.
WOF Worries?
Worn-out brake pads are a surefire way to fail a WOF here in New Zealand. They need to be above the minimum thickness to guarantee you can stop safely.
DIY or Get a Pro?
Difficulty: 6/10
Time it'll take: 2-3 hours
Gear you'll need: Jack, stands, wrench and socket sets, brake cleaner, pad spreader, torque wrench
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get cracking on those brakes, let's make sure you're sorted. Safety first, always! Grab yourself some safety glasses to keep the brake dust out of your peepers, and a pair of nitrile gloves to keep your hands clean. Brake dust is nasty stuff, so don't skimp on protection. A can of Brake Cleaner will make quick work of blasting away all that built-up carbon. Lastly, a little dab of anti-seize Caliper Grease on the caliper pins will keep everything moving smoothly and prevent future headaches. And a golden rule: never get under a car that's only supported by a jack – always use proper jack stands!
Expert Recommendation
Keeping those brake pads in good nick is a no-brainer for keeping your Toyota Dyna safe and on the road. If the pads are worn, your braking goes to custard, especially when you're hauling a heavy load. Bob @ CARFIX is always keen to yarn about parts for your Toyota Dyna or Toyoace. Pop over to Bob's Shop for a catch-up!
Fitment Notes
Double-check these pads are the right fit for your specific Dyna or Toyoace model and year. Use your vehicle's VIN to be absolutely sure, especially for models made between 1999 and 2006.
Bob's out!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle;Toyoace, don't skimp on fresh rotors. Check out our compatible TRW Disc Brake Rotors (Part No. DF7412S) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.