TRW · Part number GDB7033YO · NZ$122.00 incl. GST
For your trusty Nissan March i 16V, brake pads are the absolute heroes of safety, providing that crucial friction to bring you to a smooth, safe stop every single time.
NZ$122.00 including GST. Part number GDB7033YO.
Give Your Nissan March the Stopping Power It Deserves — Bob's Guide to TRW Brake Pads
> Your brake pads are like the unsung champions of your Nissan March, quietly working hard to transform all that zoom-zoom into a gentle stop. They're the friction kings, pressing against the brake disc to turn motion into heat, bringing your car to a halt. Especially with all the stop-start city driving we do here in NZ, those pads wear down over time, and when they do, your stopping power takes a hit. Let's get them sorted!
Hear, See, Feel: Signs Your Pads Are Calling It Quits
• That cringe-worthy squeal or grind when you hit the pedal.
• Feeling like you're pushing the pedal to the floor just to slow down.
• A judder or vibration shaking through the brake pedal.
• A spongy, soft, or just plain weird feeling when you brake.
• The dreaded brake warning light glaring at you from the dashboard.
WOF Check: Will Worn Pads Get You a Fail?
Absolutely, mate! Worn brake pads are a big no-no when it comes to your Warrant of Fitness. It's a critical safety issue, and insufficient pad material or uneven wear will see you failing that WOF faster than you can say 'full stop'. Safety first, always!
DIY or Workshop?
Difficulty: 5/10 (Moderate)
Estimated Time: 1-2 hours per axle
Tools Required: Jack, jack stands, lug wrench, C-clamp or brake caliper piston compressor, socket set, open-end wrenches, brake cleaner, torque wrench.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive into replacing those brake pads, Bob always reckons it's smart to have a few essentials on hand. Safety and a clean job are paramount!
• Safety First! Grab some sturdy Safety Glasses to protect your peepers from dust and debris, and a pair of heavy-duty Nitrile Gloves will keep your hands clean and protected from grime and brake dust.
• Cleanliness is Key: A can of quality Brake Cleaner is your best friend here. It'll blast away all that carbon dust and make sure everything is spick and span for the new pads. You'll thank yourself later!
• Smooth Operator: Don't forget some anti-seize caliper grease. It helps ensure your new pads move freely and quietly, preventing those annoying squeals down the track.
Expert Recommendation
Bob here at CARFIX always preaches that sorting out worn brake pads sooner rather than later is a no-brainer. It keeps you safe on the road and stops you from damaging your rotors, which is a much bigger headache (and bill!). These TRW brake pads are a cracker choice — known for being reliable and tough, perfect for the day-to-day grind your Nissan March tackles. Pop into Bob's Shop for a yarn if you're not sure, I'm always happy to help you nail down the exact part for your Nissan March!
Fitment Notes
These brake pads are tailor-made for NISSAN MARCH i 16V models rolling off the line between 1992 and 2003. Just a friendly heads-up: always double-check your vehicle's precise year and sub-model. Sometimes there are little quirks even within the same model range, and we want to make sure you get the perfect fit!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, don't skimp on fresh rotors. Check out our compatible TRW Disc Brake Rotors (SKU DF2725S) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.