TRW · Part number GDB4064 · NZ$159.00 incl. GST
Got a classic Ford Thunderbird (1993-1996)? New brake pads are mission-critical for keeping it safe as houses.
NZ$159.00 including GST. Part number GDB4064.
Swapping Out Your Brake Pads — TRW Style
> Brake pads are like the jandals of your car's braking system; they wear out over time. They create the friction that slows your Ford Thunderbird, turning all that kinetic energy into heat. When they're worn down, your braking goes to custard, and you risk damaging other bits and pieces.
Uh Oh... Sounds Like You've Got These Symptoms?
• Brakes squealing like stuck pigs or grinding something awful?
• Braking power feels like it's gone walkabout?
• Steering wheel or brake pedal doing the shimmy when you brake?
• Taking half a paddock to stop?
• Dashboard lit up like a Christmas tree?
Will it pass WOF?
Mate, nae chance. Dodgy brake pads are a massive safety risk. You'll fail your WOF faster than you can say 'flat white'. You need good pad thickness and proper braking to pass, no-brainer.
DIY or Workshop?
Difficulty: 6/10 (She's not too hard, but not a walk in the park either)
Estimated Time: Give yourself a good 1-2 hours per axle
Tools You'll Need: Jack, jack stands (never skimp on safety!), lug wrench, C-clamp or brake caliper piston compressor, wrench set, torque wrench, brake cleaner, wire brush, and maybe a brake bleeder kit.
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get cracking, let's make sure you're set up for success. We don't want any shemozzles, do we?
• Safety First, Eh? Never, ever get under a car supported only by a jack. Always use proper jack stands. Safety glasses are a must to keep the brake dust out of your peepers, and Nitrile Gloves will keep your hands clean from all the brake grime.
• Blast That Brake Dust: Brake dust is a pain in the backside and can ruin your day. Grab a can of Brake Cleaner to blast away that carbon dust and keep everything spick and span.
• Grease is Your Friend: A wee bit of anti-seize caliper grease on the right spots will keep things moving smoothly and prevent future headaches.
Expert Recommendation
Bob @ CARFIX reckons you should always replace brake pads the moment they show wear. It's about safety, plain and simple, and saves you from bigger bills down the line. TRW pads are a solid choice for your Thunderbird, known for doing the job, often as good as or better than the original ones. Bob @ CARFIX is always here to help you find the perfect bits for your Ford Thunderbird. Pop into Bob's Shop for a yarn!
Fitment Notes
These pads are made for Ford Thunderbird models built between 1993 and 1996. Double-check your car's year and model to be sure, as brake setups can be different even within the same model range.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these brake pads, don't skimp on proper workshop preparation and safety products. Doing the job right the first time protects your investment, saves massive workshop labor fees, and guarantees a quiet, smooth ride!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.