CARFIX

TRW Brake Pad Set GDB4056

TRW · Part number GDB4056 · NZ$158.00 incl. GST

Need new brake pads for your CHRYSLER NEW YORKER (1988-1989)? These TRW pads will sort you out!

Price

NZ$158.00 including GST. Part number GDB4056.

Fits these vehicles

Description

Get Your CHRYSLER NEW YORKER (1988-1989) Stopping Right with TRW Brake Pads
> Brake pads are the unsung heroes of your CHRYSLER NEW YORKER (1988-1989)'s safety. Over time, they wear down – it's just a fact of life. If you let them go too long, you're not only risking your rotors but also your safety. Considering the vintage of these beauties, keeping a close eye on your brakes is a no-brainer.
Is it time for new pads? Spot the Signs:
• Hear a squeal or grind when you hit the brakes?
• Taking longer to stop than you reckon it should?
• Feel a wobble in the pedal when braking?
• Can see the pads are looking thin or damaged?
• That pesky brake warning light's lit up on the dash?
WOF Woes?
Worn brake pads are a dead cert for a WOF failure here in NZ. They need to be thick enough to do their job properly. Check the official Land Transport NZ guidelines to be sure.
DIY or Get a Pro?
Difficulty: 6/10
Estimated Time: 2-3 hours per axle
Tools Required: Jack, jack stands, wrench set, socket set, brake cleaner, brake pad spreader, torque wrench
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, so you're tackling the brake pads on your CHRYSLER NEW YORKER (1988-1989). Good on ya! But before you get stuck in, let's make sure you're all set. Safety first, always!
• Safety Glasses: Don't want any brake dust or debris in your eyes. Safety Glasses are cheap as chips and worth their weight in gold.
• Nitrile Gloves: Brake dust is a bugger to get off your hands. Grab some Nitrile Gloves for a clean job.
• Brake Cleaner: Blast away all that built-up grime and brake dust before you start fiddling. Makes the job easier and safer. A can of Brake Cleaner is your best mate here.
• Caliper Grease: A little dab of anti-seize caliper grease will keep everything moving smoothly and prevent annoying squeals.

And a golden rule, mate: Never, ever get under a car supported only by a jack. Use proper jack stands – your life depends on it!
Expert Recommendation
Swapping out those brake pads is a smart move to keep your CHRYSLER NEW YORKER (1988-1989) safe as houses. TRW pads are a top choice for getting your stopping power back. Bob @ CARFIX is always keen to lend a hand figuring out what you need for your CHRYSLER NEW YORKER. Swing by Bob's Shop for a yarn!
Fitment Notes
Double-check these pads are the right fit for your CHRYSLER NEW YORKER (1988-1989) model and brake setup. Always do both sides of the axle at the same time for even braking. No point in doing just one side, that's just asking for trouble. Bob's the word!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these brake pads, don't skimp on proper workshop preparation and safety products. Doing the job right the first time protects your investment, saves massive workshop labor fees, and guarantees a quiet, smooth ride!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.