CARFIX

TRW Brake Pad Set Inc. Wear Sensor GDB4005

TRW · Part number GDB4005 · NZ$136.00 incl. GST

TRW Brake Pad Set Inc. Wear Sensor by TRW, part number GDB4005.

Price

NZ$136.00 including GST. Part number GDB4005.

Fits these vehicles

Description

Brake Pad Replacement: A TRW Guide for Kiwis
> Brake pads are like the jandals of your braking system – they wear out over time, especially on heavier vehicles like your Buick Electra or Pontiac Trans Sport. Don't get caught out with dodgy brakes – keep 'em in top nick!

Symptoms That Led You Here
• Squealing like a pig when you brake?
• Brakes feelin' a bit soft?
• Taking longer to pull up at the lights?
• Steering wheel juddering when you hit the anchors?
• Dashboard light screaming at you?

Will it pass WOF?
Nuh uh, mate. Worn brake pads are a surefire way to fail your WOF. Land Transport NZ are pretty strict on brake performance, so get them sorted!

DIY or Workshop?
Difficulty: 6/10
Estimated Time: 2-3 hours
Tools Required: Jack and stands, wrench set, socket set, brake cleaner, C-clamp or brake spreader, torque wrench

🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get stuck in, let's make sure you're set up for success:
• Safety First, Always: Never, ever get under a car supported only by a jack. Use proper axle stands – your life depends on it!
• Keep it Clean: Brakes create a mountain of nasty carbon dust. Grab some Brake Cleaner to blast it all away. Keeps things working smoothly and stops that dust from getting everywhere.
• Glove Up: Protect your hands with some heavy-duty Nitrile Gloves. Brake cleaner dries out your skin, and nobody wants greasy mitts.
• Lube is Your Friend: A little bit of anti-seize caliper grease on the right spots will keep things moving freely and prevent annoying squeaks. Ask Bob for the good stuff!

Expert Recommendation
Don't muck around with worn brakes – it's just not worth the risk. TRW brake pads are a reliable choice for your Buick or Pontiac. Pop into Bob's Shop for a yarn and we'll get you sorted!

Fitment Notes
Double-check those new pads fit your specific model and caliper type. Some models had different brake setups depending on the year and trim. Make sure you get the right ones!

Bob's waiting to help you nail this job. Head over to Bob's Shop now!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, don't skimp on fresh rotors. Check out our compatible TRW Disc Brake Rotors (SKU DF4464S) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.