TRW Brake Pad Set

TRW · Part number GDB3515 · NZ$266.00 incl. GST

Need new brake pads for your Infiniti or Nissan? Brake pads are dead important for stopping safely.

Price

NZ$266.00 including GST. Part number GDB3515.

Fits these vehicles

• Infiniti FX (2008+)
• Infiniti FX (2008+)
• Infiniti FX (2010+)
• Infiniti G (2007+)
• Infiniti G (2008+)
• Infiniti G (2010+)
• Infiniti G (2010+)
• Infiniti M (2010+)
• Infiniti Q50 (2013+)
• Infiniti Q50 (2015+)
• Infiniti Q60 (2013+)
• Infiniti Q60 (2013+)
• Infiniti Q60 (2016+)
• Infiniti Q70 (2013+)
• Infiniti Q70 (2013+)
• Infiniti QX70 (2013+)
• Infiniti QX70 (2013+)
• Infiniti QX70 (2013+)
• Nissan 370Z (2009+)
• Nissan 370Z (2009+)
• Nissan 370Z (2009+)
• Nissan 370Z (2009+)
• Nissan 370Z (2009+)
• Nissan 370Z (2009+)
• Nissan 370Z (2013+)
• Nissan 370Z (2013+)
• Nissan 370Z (2013+)

Description

Swapping Out Your Brake Pads — the TRW Way
> Your brake pads are what actually slows you down, pressing against the rotors when you hit the brakes. Tough conditions and dusty metal tracks mean they wear out over time, especially if you're giving it heaps in something like a Nissan 370Z or Infiniti Q50. Ignoring worn pads is a no-brainer way to end up in a ditch.
Uh Oh, Sounds Like Your Brakes Are...
• Making a racket? Squealing or grinding is a dead giveaway.
• Not as sharp as they used to be?
• Taking ages to stop?
• Shaking the steering wheel when you brake?
• Showing a warning light on the dash?
Will it pass WOF?
Dodgy brakes are a surefire way to fail a WOF check here in New Zealand. Pads need enough meat on them to pull you up safely. Give them a regular once-over to be sure.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 2-3 hours
Tools Required: Jack, jack stands, wrench set, socket set, brake cleaner, C-clamp or brake spreader tool.
🛠️ Bob's "Get It Done Right" Companion Checklist
• Safety First, Eh? Never, ever get under a car supported only by a jack! Use proper jack stands. Safety glasses are a must to keep brake dust out of your peepers.
• Keep it Clean: Brake cleaner is your best mate here. Blast away all that nasty carbon dust before you start poking around. You can grab some right here: Brake Cleaner.
• Protect Your Mitts: Brake jobs can be hard on the hands. A decent set of Nitrile Gloves will keep you clean and safe from all the grime and sharp edges.
• Don't Forget the Grease: A little anti-seize caliper grease on the right spots keeps everything moving smoothly and prevents future squeaks. Ask Bob for the right stuff.
Expert Recommendation
Getting your brake pads sorted is crucial for safe driving. Worn pads mean longer stopping distances and a higher chance of an accident. Bob @ CARFIX is always keen to lend a hand figuring out exactly what you need. Pop into Bob's Shop for a yarn!
Fitment Notes
Double-check these pads fit your exact model and brake caliper type. Some Infiniti and Nissan models have different brake setups depending on the year and trim level.

---

🛠️ Bob's Pro Tip: Do the Job Right!
> DBA2308X)](/parts/DBA2308X) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.