TRW · Part number GDB3446 · NZ$364.00 incl. GST
TRW Brake Pads Set by TRW, part number GDB3446.
NZ$364.00 including GST. Part number GDB3446.
Honda CR-V Brake Pad Replacement Guide — With TRW
> Brake pads are like the tread on your tyres – they wear down over time. They're what helps your Honda CR-V pull up safely, turning all that forward motion into heat when you hit the brakes. Keeping them in good nick is crucial, especially if you're tackling everything from city driving to open-road adventures.
Spotting the Warning Signs
• Hear a squeal or a nasty grinding noise when you brake?
• Brakes feel a bit soft or 'spongy'?
• Steering wheel or brake pedal vibrates when you slow down?
• Taking longer to stop than usual?
• Pads look thin – less than 3mm of material left?
Will it pass WOF?
Worn brake pads are a no-go for a WOF. It's a safety issue, plain and simple. The legal minimum thickness here in NZ is around 1.5mm, but don't wait that long! Get them sorted before they become a problem.
DIY or Workshop?
Difficulty: 5/10 (Moderate)
Estimated Time: 1-2 hours per axle
Tools Required: Jack, jack stands, lug wrench, C-clamp or brake caliper piston tool, socket set, torque wrench, brake cleaner, wire brush, and potentially a brake fluid bleeder kit.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking on those brakes, mate, a bit of prep goes a long way. Safety first, eh?
• Safety Glasses: Don't want any brake dust or debris in your peepers. Safety Glasses are cheap as chips and worth their weight in gold.
• Nitrile Gloves: Brake dust is grim stuff. A decent set of Nitrile Gloves will keep your hands clean and protected.
• Brake Cleaner: Blast away all that carbon dust from the brake parts. Makes the job cleaner and helps you spot any issues. Grab a can of Brake Cleaner.
• Caliper Grease: A little dab of anti-seize caliper grease on the right spots keeps everything moving smoothly and prevents annoying squeals. Worth its weight in gold.
Expert Recommendation
I reckon you should sort your brake pads at the first sign of trouble. TRW makes a solid pad, known for decent performance. something for every budget. Pop into Bob's Shop and we'll find the right pads for your CR-V. It's a no-brainer for keeping your family safe.
Fitment Notes
These pads are made for a bunch of Honda CR-V models from 2006 to 2012, including the i-CTDi, i-VTEC, and i-DTEC versions. Double-check your year, model, and engine to be sure.
Swing by Bob's Shop for a yarn about getting your CR-V sorted!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, don't skimp on fresh rotors. Check out our compatible TRW Disc Brake Rotors (Part No. DF4028S) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.