TRW Brake Pad Set (DB1517)
TRW · Part number GDB3397 · NZ$197.00 incl. GST
Need new brake pads for your Toyota Harrier (2005-2008)? Brake pads are what stop you, and TRW pads at CARFIX give you reliable stopping power.
Price
NZ$197.00 including GST. Part number GDB3397.
Description
Toyota Harrier Brake Pad Replacement Guide — Ft. TRW
> Your Harrier's brake pads are super important for safety. They create friction against the rotors to slow you down. Over time, they wear out from heat and use, which makes your brakes less effective and can even damage the rotors. Let's get them sorted!
Spotting the Signs of Dodgy Brakes
• Squealing or grinding sounds when you hit the brakes? That's a yarn.
• Taking longer to stop than usual? Not ideal, mate.
• Brake pad warning light lit up on the dash? Get it checked.
• Can see the pads are looking thin or damaged? No need to guess.
• Pads wearing unevenly? Could be a caliper issue. Get it looked at.
Will it pass WOF?
Worn brake pads are a common reason for failing a WOF here in NZ. The pads need to be thick enough to stop you safely. Check them regularly to be sure.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 2-3 hours
Tools Required: Jack, jack stands, wrench set, socket set, brake cleaner, brake pad spreader, torque wrench.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get started, remember safety first! Never get under a car supported only by a jack – always use jack stands. Grab some Brake Cleaner to blast away brake dust (that stuff's nasty!), and a can of anti-seize caliper grease will help keep things moving smoothly. Don't forget your safety glasses and nitrile gloves to keep your hands clean. Trust me, you'll thank me later.
Expert Recommendation
Changing your brake pads is a no-brainer for your Harrier's safety. If they're worn, your stopping distance goes way up, which is never good. I'm always here to help you find the perfect part for your Harrier so pop in and see me at Bob's Shop!
Fitment Notes
Make sure these brake pads fit your Harrier model and year (2005-2008). Double-check if they're for the front or rear brakes.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, don't skimp on fresh rotors. Check out our compatible TRW Disc Brake Rotors (Part No. DF7257S) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.