TRW · Part number GDB337 · NZ$117.00 incl. GST
Need new brake pads for your classic SAAB 95 or 96 V4? Spot on, mate! TRW brake pads will sort you out nicely for safe stopping.
NZ$117.00 including GST. Part number GDB337.
Swapping Out Your SAAB's Brake Pads — with TRW
> Your SAAB 95 or 96 V4's brake pads are a seriously important bit of kit. They turn all that forward motion into heat to bring you to a halt. Naturally, they wear down over time, which means less stopping power and potential damage to your rotors. Best not to let that happen!
What Clued You In?
• Brakes making a racket? Squealing or grinding? Not ideal.
• Taking longer to stop than usual? That's a worry.
• Brake pedal feeling a bit soft or spongy? No good.
• Can you see the pads are looking worse for wear?
• Dash light screaming at you?
WOF Woes?
Worn brake pads are a surefire way to fail a WOF here in NZ. They need to be thick enough to do their job properly, or it's a no-go.
DIY or Hand It Over?
Difficulty: 6/10
Estimated Time: 2-4 hours
Tools You'll Need: Jack, jack stands (never skip these!), wrench set, socket set, brake cleaner, C-clamp or brake spreader, torque wrench.
Expert's Two Cents
Getting those brake pads replaced is crucial for keeping your SAAB safe and sound. TRW pads (like this very SKU) are a solid choice, offering great performance and long life. Bob at CARFIX is your man for figuring out exactly what you need for your classic SAAB. Pop into Bob's Shop for a yarn!
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get cracking on those brakes, let's make sure you're set up for success. Safety first, always!
• Safety Glasses: Don't want any brake dust or grime in your peepers. Safety Glasses are your best mate here.
• Nitrile Gloves: Keep those hands clean and protected from brake fluid and other nasties. Grab a pair of Nitrile Gloves.
• Brake Cleaner: Essential for blasting away brake dust and keeping everything clean. A can of Brake Cleaner is a must.
• Caliper Grease: A little dab of anti-seize caliper grease on the contact points will prevent squealing and ensure smooth operation.
Fitment Notes
Double-check these pads are the right fit for your specific SAAB 95 or 96 V4 model and year. Also, have a good look at your brake rotors. If they're looking rough, now's the time to replace them too.
Swing by Bob's CARFIX Shop for a chinwag and get your SAAB sorted!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these brake pads, don't skimp on proper workshop preparation and safety products. Doing the job right the first time protects your investment, saves massive workshop labor fees, and guarantees a quiet, smooth ride!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.