TRW · Part number GDB3344 · NZ$136.00 incl. GST
TRW Electric Blue EV Hybrid Brake Pad Set Inc. Wear Sensor (DB2383) by TRW, part number GDB3344.
NZ$136.00 including GST. Part number GDB3344.
Brake Pad Replacement Guide — Featuring TRW
> Brake pads are the unsung heroes of your KIA Sorento, working tirelessly to keep you safe as you cruise around. They create friction, turning your speed into heat to slow you down. But, like your favourite jandals, they wear out over time. This means less stopping power and a potentially dicey situation, especially with those tough conditions we often find ourselves in.
Symptoms That Led You Here
• Squealing like a gutted pig every time you hit the brakes.
• Your brake pedal feels like you're stepping on a sponge.
• The steering wheel's doing the haka when you brake.
• Taking longer to pull up than you reckon you should be.
• That pesky warning light's lit up on the dash.
Will it pass WOF?
No way, mate. Dodgy brakes are a definite WOF fail. The legal limit is about 1.5mm, but most mechanics will tell you to swap them out around 3mm for peace of mind.
DIY or Workshop?
Difficulty: 6/10 (Moderate)
Estimated Time: 1-2 hours per axle
Tools Required: Jack, jack stands, wheel nut wrench, C-clamp or brake caliper piston compressor, socket set, torque wrench, wire brush, brake cleaner, and potentially a brake caliper guide pin grease.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking on those brakes, let's make sure you're sorted. Safety first, always! And a clean job is a good job, right?
• Safety Glasses: Don't muck around with your eyesight. Grab some Safety Glasses to keep the dust and debris out.
• Nitrile Gloves: Keep those mitts clean and protected from brake dust with some Nitrile Gloves. Brake cleaner can be nasty stuff, so gloves are a must.
• Brake Cleaner: Blast away that brake dust! A can of Brake Cleaner will make the job much cleaner and help your new pads bed in nicely.
• Caliper Grease: A little dab of Caliper Grease on the caliper pins keeps everything moving smoothly.
Expert Recommendation
Bob @ CARFIX reckons you should swap out those brake pads the moment they start looking sad to keep you and the family safe. For your KIA Sorento, those TRW pads are a solid choice – they're known for being reliable and lasting well, perfect for an SUV that gets a good workout. Give Bob @ CARFIX a yell, and he'll sort you out with the right part for your KIA Sorento. Swing by Bob's Shop for a yarn!
Fitment Notes
These TRW brake pads are the real deal for KIA Sorento models built between 2002 and 2011, including the CRDi diesels and V6 petrol guzzlers. Double-check your year, model, and engine just to be sure, as brake setups can be a bit different.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> DBA2898X)](/parts/DBA2898X) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.